MuxLab 500762-RX-V2 Overview
The 4K60 HDMI-over-IP H.264/H.265 PoE Receiver V2 from MuxLab allows you to receive up to a UHD 4K60 signal from up to 328' away over a single Cat 5e/6 cable. It's compatible with the MuxLab 500762-TX, 500763-TX, or 5007640TX transmitters and can be set up in various combinations with Ethernet switches, network controllers, and routers. The receiver then outputs the signal to an HDMI display.
The receiver allows you to create a matrix, video wall, or multiview configurations. With H.264/H.265 codec support, the transmitter allows streaming over a local network or over the Internet for worldwide distribution in a low-bandwidth workflow. It can be controlled via remote applications using the DB9 serial port using RS-232 protocols. Featuring support for Power-over-Ethernet (PD), the transmitter can be powered by a PoE (PSE) Ethernet switch, but it also supports an optional power supply.
Key Features
- Compatible with the 500762-TX, 500763-TX, and 500764-TX transmitters
- Supports up to 4K60 4:4:4 video streams
- Supports up-scales 1080p60 video streams from transmitter and other devices up to 4K60
- Supports video wall and multiview capabilities
- H.264/H.265 video codec support for low-latency LAN and Internet transmission
- Supports SPDIF (TOSLINK) audio out
- RS-232 and directional IR for remote control of end devices
- PoE powered, via PoE (PSE) Ethernet switch
- Managed via Pro Digital Network Controller (500812) and Muximus Network Controller (500813)
Applications
- Digital signage
- Video walls
- Multiview systems
- Medical information systems
- A/V streaming
- Commercial and residential AV systems
- Boardrooms
MuxLab 500762-RX-V2 Specs
Interfaces
| Outputs | 1x HDMI (HDMI 2.0) Female 1x TOSLINK (S/PDIF) Female 1x 1/8" / 3.5 mm TRS (Stereo Audio) Female |
| Embedded Audio Output | HDMI |
| Other I/O | 1x USB-A 3.0 / 3.1/3.2 Gen 1 Input 1x RJ45 10/100 Ethernet Input/Output 1x 1/8" / 3.5 mm IR Output 1x DE-9/DB-9 RS-232 Input/Output |
Standards
| HDR Support | Yes |
| HDCP Support | Yes |
| EDID Support | Yes |
Transmission
| Max Transmission Distance | UHD 4K at 60 Hz: 328.1' / 100 m (via Cat 5e/6) |
| Video Format | HDMI (4:4:4) UHD 4K: 60 fps |
| Supported Cable Types | Cat 5e/6 |
| Latency | 200 ms |
Power
| Power I/O | 1x Barrel Input |
| PoE Support | PoE 802.3af |
| Power Consumption | Device: (4.5 W) |
Environmental
| Operating Temperature | 32 to 72°F / 0 to 40°C |
| Storage Temperature | -4 to 185°F / -20 to 85°C |
| Operating Humidity | 95% |
| Storage Humidity | 95% |
General
| Certifications | CE, FCC, RoHS |
| Dimensions | 4.4 x 3.6 x 1" / 111 x 92 x 25 mm |
| Weight | 14.1 oz / 400 g |
In the Box
- MuxLab 4K60 HDMI-over-IP H.264/H.265 PoE Receiver V2
- 3-Year Manufacturer Warranty
No posts found
