EAN: 627699000205
The MuxLab Digital Audio Balun allows an audio source from a digital audio decoder/amplifier to be connected up to 600 (183m) away using 1 twisted pair cable, and supports Dolby Digital and dts digital audio formats. When used in pairs, it allows a digital audio source such as a DVD, VCR, or satellite receiver to be connected to a digital audio home theater system.
Featuring screw terminals that connect directly to the digital audio equipment, the Digital Audio Balun also features built-in cable strain relief for ease of installation and reliable connectivity. It has a common mode rejection of up to 60 dB at 10 MHz for an error-free connection.
Source from a digital audio decoder/amplifier to be connected up to 600 (183m) away
Uses 1 twisted pair cable
Supports Dolby Digital and dts digital audio formats
Allows a digital audio source such as a DVD, VCR, or satellite receiver to be connected to a digital audio home theater system
Features screw terminals that connect directly to the digital audio equipment
Built-in cable strain relief for ease of installation and reliable connectivity
Common mode rejection of up to 60 dB at 10 MHz for an error-free connection
MuxLab Digital Audio Balun Specs
Environment | Dolby Digital, Dolby Pro Logic, dts, LOGIC7, THX Surround EX |
Devices | DVD, VCR, camcorders, satellite receivers, home theater, channel processors, amplifiers, D/A converters, MPEG encoders/decoders, switchers and other commercial or consumer audio equipment supporting digital audio |
Transmission | Transparent to the user |
Bandwidth | DC to 25 MHz |
Input | Maximum Input: 1.0 Vp-p |
Insertion Loss | Less than 1 dB per pair over the frequency range |
Return Loss | Greater than 15 dB over the frequency range |
Common Mode Rejection | Greater than 60 dB @ 10 MHz |
Maximum Distance | Cat 5 - 600` (183m) |
Cable Requirements | 24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz. Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000` (305m) at 1 MHz |
Connectors | 2 screw terminals 1 S/PDIF (RCA) gold-plated male connector |
Pins | Pin Configuration: Tip-signal, Ring-GND |
Impedance | Input: 75 ohms (RCA) Output: 100 ohms (Screw Terminals) |
Temperature | Operating: 32 ~ 131°F (0 ~ 55°C) Storage: -4 ~ 185°F (-20 ~ 85°C) Humidity: up to 95% |
Enclosure | Fire retardant plastic |
Dimensions | 2.3 x 0.6 x 0.6" (5.8 x 1.6 x 1.6cm) |
Weight | 1.5 oz (43g) |
Packaging Info
Package Weight | 0.07 lb |
Box Dimensions (LxWxH) | 2.35 x 0.75 x 0.75" |
In the Box
- MuxLab Digital Audio Balun
No posts found