DATAPATH VisionAV-HD Capture Card (Half Length Full-Height PCI Express)
The VisionAV-HD Capture Card from DATAPATH is a four lane PCI Express capture card with three video capture inputs - two channels of HD DVI video and an extra composite video input all operating simultaneously and independently with full analog and digital audio support. The VisionAV-HD also adds multiple channels of audio capture, which can be synchronized in software using time stamping with all video capture channels.
This half-length full height card features a full mechanical sixteen lane connector with notches which will enable it to fit 4, 8 and 16 lane motherboard connectors. The VisionAV-HD also adds embedded audio capture from the HDMI signal, which can be synchronized with the respective video channel. The video capture card provides balanced and unbalanced analog audio capture through an optional AM2 audio module. This provides a single flexible card solution for areas such as medical, lecture capture, web casting and video conferencing.
Four lane PCIe lane bus, with net 1.6 GB/s total capture bandwidth
Triple channel PCI Express capture card Two DVI-I capture channels, featuring HDMI/ DVI/ TGB/ YPbPr video capture, HDMI embedded Audio Capture and streaming, and low input to output capture latency One SD/ Composite capture channel, featuring PAL, NTSC, SECAM up to 720 x 576 @ 16-bit color
Direct DMA to graphics memory of third party graphics cards
All standard features of the Vision range of video capture cards
Driver support included within the Datapath unified Windows and Linux drivers
The VisionAV-HD Capture Card from DATAPATH is a four lane PCI Express capture card with three video capture inputs - two channels of HD DVI video and an extra composite video input all operating simultaneously and independently with full analog and digital audio support. The VisionAV-HD also adds multiple channels of audio capture, which can be synchronized in software using time stamping with all video capture channels.
This half-length full height card features a full mechanical sixteen lane connector with notches which will enable it to fit 4, 8 and 16 lane motherboard connectors. The VisionAV-HD also adds embedded audio capture from the HDMI signal, which can be synchronized with the respective video channel. The video capture card provides balanced and unbalanced analog audio capture through an optional AM2 audio module. This provides a single flexible card solution for areas such as medical, lecture capture, web casting and video conferencing.
Four lane PCIe lane bus, with net 1.6 GB/s total capture bandwidth
Triple channel PCI Express capture card
Direct DMA to graphics memory of third party graphics cards
All standard features of the Vision range of video capture cards
Driver support included within the Datapath unified Windows and Linux drivers
DATAPATH VISIONAV Specs
| Card Format | PCI Express x4 half size plug-in card |
| Connectors | 2 x DVI-I, video input 1 x RCA female, video input |
| Capture | HDMI: Supports HDMI 1.3 to 225 MHz (including deep color modes) HDMI audio can be selected as source for audio streaming Incorporates TMDS equalizer to support up to 65.6` (20 m) cables DVI: Supports DVI 1.0 RGB 24-bit capture to 165 MHz Incorporates TMDS equalizer to support up to 65.6` (20 m) cables VGA/ YPbPr: Triple ADCs sampling up to 170 Mp/s, full 4:4:4 sampling, 8-bits per color 5-wire, 4-wire or sync-on-green signal format Composite Video: CCIR601 sampling, PAL, , SECAM formats automatically detected Audio: Stereo Line-In / Stereo balanced inputs with programmable gain (+/-12 dB) 16-bit sampling at 44.1, 48, 96 kHz Analogue stereo line-out for direct pass-through of selected input at up to 64 kHz sampling, sourced from Analog input or HDMI channel |
| Video Capture | Memory: 256 MB high bandwidth frame buffer supports triple buffering of HD and SD video Local storage of complex scatter-gather tables for DMA engine (eliminates read overhead) |
| Video Processing | Polyphase FIR scaling engine (7 x 5) for hardware downscaling and upscaling Color space conversion allows captured data to be transferred in any format: |
| Direct Memory Access | Direct DMA to physical or virtual memory buffers with full scatter-gather support DMA bandwidth: up to 800 MB/s 16 independent DMA streams: Any mix of HD and SD sources, color space, cropping and scaling parameters |
| Compatible Operating Systems | Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7, Windows 8 and Linux support |
| Power Requirements | Max current at 12 V - 1 A Max current at 3.3 V - 1 A |
| Thermal Dissipation | 15.5 W |
| Temperature | Operating: 32 to 96°F (0 to 35°C) Storage: -4 to 158°F (-20 to 70°C) |
| Relative Humidity | 5 - 90%, non-condensing |
| Dimensions | 4.3 x 6.7" (11.0 x 17.0 cm) |
In the Box
- DATAPATH VisionAV-HD Capture Card (Half Length Full-Height PCI Express)
- 3-Year Manufacturer Warranty
No posts found
