Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
DECIMATOR MC-DMON-QUAD 4-Channel 3G-SDI Multiviewer for openGear Platforms
The MC-DMON-QUAD from DECIMATOR is a 4-channel, 3G-SDI multiviewer for use in openGear frames. It supports a variety of resolutions and formats up to 1080p60 over 2.97 GB/s SDI, and can arbitrarily mix formats and aspect ratios. For SDI connectivity and tally, the card is compatible with the separately available DR1-10B1G rear.
Four 3G-SDI inputs with automatic format detection
Each input can have a unique format - data rate, resolution, and frame rate
Supports unique aspect ratios per quadrant
Functions as 1 to 4 multiviewer or 4 to 1 multiplexer
Custom Layouts with various standard layouts
16-Character UMD overlay per window with custom positioning and size
8-Channel Audio Metering overlay per window with custom positioning and size
Audio ID overlay
Supports dynamic UMD and tallies via RS422/485 using the widely implemented TSL protocol (requires separately available DR1-10B1G connectivity module)
Tallies can be applied to either tally boxes (default) or border element
Tally boxes allows for up to four Tallies per window
Selectable output format in both Full-Screen MultiViewer mode
Low latency buffering enables connection of unsynchronized sources
Supports 3G level A and B on inputs and output, allowing conversion between 3G level A and B
In pass-through mode, the selected input is passed to both SDI outputs
Mini-USB port for firmware updates
Supports openGear DashBoard for control
The MC-DMON-QUAD from DECIMATOR is a 4-channel, 3G-SDI multiviewer for use in openGear frames. It supports a variety of resolutions and formats up to 1080p60 over 2.97 GB/s SDI, and can arbitrarily mix formats and aspect ratios. For SDI connectivity and tally, the card is compatible with the separately available DR1-10B1G rear.
Four 3G-SDI inputs with automatic format detection
Each input can have a unique format - data rate, resolution, and frame rate
Supports unique aspect ratios per quadrant
Functions as 1 to 4 multiviewer or 4 to 1 multiplexer
Custom Layouts with various standard layouts
16-Character UMD overlay per window with custom positioning and size
8-Channel Audio Metering overlay per window with custom positioning and size
Audio ID overlay
Supports dynamic UMD and tallies via RS422/485 using the widely implemented TSL protocol (requires separately available DR1-10B1G connectivity module)
Tallies can be applied to either tally boxes (default) or border element
Tally boxes allows for up to four Tallies per window
Selectable output format in both Full-Screen MultiViewer mode
Low latency buffering enables connection of unsynchronized sources
Supports 3G level A and B on inputs and output, allowing conversion between 3G level A and B
In pass-through mode, the selected input is passed to both SDI outputs
Mini-USB port for firmware updates
Supports openGear DashBoard for control
DECIMATOR MC-QUAD Specs
Standards
| Video Standard Compliance | SMPTE 259M/274M/292M/296M/424M |
In the Box
- DECIMATOR MC-DMON-QUAD 4-Channel 3G-SDI Multiviewer for openGear Platforms
No posts found
