eMotimo Network to Serial Adapter for Spectrum ST4
Control your Spectrum ST4 motorized pan and tilt head using a Skaarhoj PTZ controller using this Network to Serial Adapter from eMotimo. The adapter allows you to connect a Skaarhoj PTZ controller via IP over a network and then it converts the control signals to serial.
The adapter features an RJ45 port that connects to your network and supports your network s DHCP server to set the IP address. Using the connected cable, it plugs into the ST4 using a 2.5mm TRS plug to relay the serial control commands to the head. A 5 VDC power adapter is included to plug in the adapter, and there are mounting holes on the adapter to mount it onto a wall or console.
The Skaarhoj controller cannot be used at the same time as the ST4 Bluetooth controller.
Compatibility
eMotimo Spectrum ST4 pan/tilt head
Skaarhoj PTZ controllers
Control your Spectrum ST4 motorized pan and tilt head using a Skaarhoj PTZ controller using this Network to Serial Adapter from eMotimo. The adapter allows you to connect a Skaarhoj PTZ controller via IP over a network and then it converts the control signals to serial.
The adapter features an RJ45 port that connects to your network and supports your network s DHCP server to set the IP address. Using the connected cable, it plugs into the ST4 using a 2.5mm TRS plug to relay the serial control commands to the head. A 5 VDC power adapter is included to plug in the adapter, and there are mounting holes on the adapter to mount it onto a wall or console.
The Skaarhoj controller cannot be used at the same time as the ST4 Bluetooth controller.
Compatibility
eMotimo Spectrum ST4 pan/tilt head
Skaarhoj PTZ controllers
eMotimo ACC_NETA_1 Specs
Input Connector | 1 x RJ45, Ethernet |
Output Connector | 1 x 2.5 mm TRS Jack, Serial |
Power Input | 5 VDC |
Packaging Info
Package Weight | 0.515 lb |
Box Dimensions (LxWxH) | 6 x 4.1 x 2.1" |
In the Box
- eMotimo Network to Serial Adapter for Spectrum ST4
- 5 VDC Power Adapter
- 2-Year Manufacturer Warranty
No posts found