RigWheels PortaRail Collapsible Speed Rail with Six 40" Sections & Four Connectors

The PortaRail Collapsible Speed Rail kit from RigWheels includes six 40" sections, four threaded connectors, and twelve rubber end caps. The 40" sections can be screwed together via the connectors to form two 120"-long rails for the PortaRail collapsible dolly/slider rail system (not included).

The rails are constructed from 6061 aluminum for rigidity, and provide precision camera movement. At 80", the camera slider rails have less than 1/8" of flex with a 40 lb load placed at the center. These rods can also be used with other suspended or ground rail systems that work with an outer diameter of 1.65". All parts are made in the USA.

Note:

This kit includes only rails and connectors. The dolly/slider is not part of the bundle and must be purchased separately.

RigWheels PortaRail Camera Slider Rod (40" Section)

The PortaRail Camera Slider Rod from RigWheels is a 40" section rod designed for the PortaRail collapsible dolly/slider rail system. The rod is 40" long and can be screwed together via the threaded connectors. The rod is constructed of 6061 aluminum and designed to provide more rigidity. Each piece goes through a 6 step process which makes them straight and round for precision camera movement. You can add as many sections as you need for longer shots. This rod can also be used with other suspended or ground-rail system that work with a 42mm outer diameter.

Note:

This kit includes only rails and connectors. The dolly/slider is not part of the bundle and must be purchased separately.

6061 Aluminum construction

Made in U.S.A

EAN: 854821004460

RigWheels PRC1 PortaRail Connector

The PRC1 PortaRail Connector from RigWheels is a connector used to connect PortaRail Collapsible Rail products.

Note:

This kit includes only rails and connectors. The dolly/slider is not part of the bundle and must be purchased separately.

EAN: 854821004521