The silver Matthews Dutti Dolly Rental Kit offers a portable camera dolly platform with up to 800 lb payload capacity in one carrying case. With a platform height of under 2" , the Dutti Dolly can be used directly on smooth surfaces or with either an industry-standard speed rail or a commercially available tubing. This cost-saving kit was assembled with the input of professional grips and rental houses to provide all needed components except for the track. It includes 75, 100, and 150mm tripod head bowls, a 2.5" Mitchell riser, three track brackets with 16" center-to-center spacing, and two 5/8 to 3/8" Baby Pins.
Note:
The track is not included.
Matthews Dutti Dolly Universal Stand Bracket
The Dutti Dolly Universal Stand Bracket from Matthews is used to support 0.75 to 2.25" diameter round or square track sections. It can be mounted on stands that have a baby or junior pin using an included receiver, or used on flat surfaces. The stand is designed specifically for use with the Dutti Dolly, with the track slots having a center-to-center distance of 16" .
Note: A minimum of two Dutti Dolly Universal Stand Brackets are required one at each end of the track.
Note:
The track is not included.
Matthews Mitchell Mount to 75mm Bowl Adapter
This is a universal Mitchell Mount to 75mm Bowl Adapter from Matthews for use on tripods, dollies, and other equipment. It s precision machined and requires no tools or hardware for installation or removal.
Note:
The track is not included.
Matthews Mitchell Mount to 100mm Bowl Adapter
This is a universal Mitchell Mount to 100mm Bowl Adapter from Matthews for use on tripods, dollies, and other equipment. It s precision machined and requires no tools or hardware for installation or removal.
Note:
The track is not included.
Matthews Mitchell Mount to 150mm Bowl Adapter
This is a universal Mitchell Mount to 150mm Bowl Adapter from Matthews for use on tripods, dollies, and other equipment. It s precision machined and requires no tools or hardware for installation or removal.
Note:
The track is not included.
Matthews Mitchell Riser Kit for Dutti Dolly
Use the Mitchell Riser Kit for Dutti Dolly from Matthews to raise your tripod head by 2.5" . The clearance it provides enables you to use a geared head or bowl adapter on your Dutti Dolly, Matthews Slider, or Lazy Susan rig.
Note:
The track is not included.
Matthews Baby Pin - 5/8" with 3/8" Threaded Tip
For use with Lightweight Telescoping Hangers
Note:
The track is not included.
Matthews Dutti Dolly Universal Stand Bracket Specs
Physical
| Track Compatibility | 0.75 to 2.25" (1.9 to 5.7 cm) round or square tubes (outside diameter) 1.25" (3.2 cm) square tube recommended Center-to-Center Spacing: 16" (40.6 cm) |
| Length | 19.25" (48.9 cm) |
| Weight | 3 lb (1.36 kg) |
Packaging Info
| Package Weight | 2.9 lb |
| Box Dimensions (LxWxH) | 19 x 4.25 x 1.4" |
Matthews Mitchell Mount to 75mm Bowl Adapter Specs
Packaging Info
| Package Weight | 1.3 lb |
| Box Dimensions (LxWxH) | 4.6 x 4.3 x 1.5" |
Matthews Mitchell Mount to 100mm Bowl Adapter Specs
Packaging Info
| Package Weight | 1.06 lb |
| Box Dimensions (LxWxH) | 6.05 x 5.6 x 1.85" |
Matthews Mitchell Mount to 150mm Bowl Adapter Specs
Packaging Info
| Package Weight | 2.05 lb |
| Box Dimensions (LxWxH) | 5.9 x 5.9 x 1.7" |
Matthews Mitchell Riser Kit for Dutti Dolly Specs
Physical
| Risers | Height: 2.5" / 6.4 cm |
| Weight | Not Specified by Manufacturer |
Packaging Info
| Package Weight | 2 lb |
| Box Dimensions (LxWxH) | 7.25 x 7.25 x 1.5" |
Matthews Baby Pin - 5/8" with 3/8" Threaded Tip Specs
Packaging Info
| Package Weight | 0.23 lb |
| Box Dimensions (LxWxH) | 7.15 x 4.15 x 0.7" |
In the Box
- Junior and Baby Pin Receiver
- 2-Year Manufacturer Warranty
- 2-Year Manufacturer Warranty
- Mitchell Plate
- 4 x 2.5" Riser
- Mounting Hardware
- 2-Year Manufacturer Warranty
No posts found
