Proaim 32' Flight Package with Jib/Crane, Dolly & Pan/Tilt Head

Capture smooth, dynamic sweeping pans and camera rises with the professional 32 Flight Package with Jib/Crane, Dolly & Pan/Tilt Head from Proaim. The heavy-duty crane/jib Flight system features a jib arm, a tripod stand, a dolly, a Gold motorized pan/tilt head with remote controller, and counterweight rods on the back of the jib arm.

The heavy-duty jib supports loads up to 46.3 lb and installs onto the tripod stand, which features a floor dolly. Suspension cables and safety wires provide a safe, smooth tilt operation. The modular jib arm breaks down into eight 4 sections, allowing you to put them together to create different lengths. The portable floor dolly features rubber wheels, wheel locks, and a weight platform, and it transports the system smoothly.

The Gold pan/tilt head mounts on the end of the jib and allows you to mount your camera and control the pan and tilt axes using a joystick on the remote control box. To balance the load, counterweight rods at the rear of the arm accept separately available, standard dumbbell weights. An LCD mounting arm allows you to mount a monitor when controlling the camera via remote. The whole kit fits into the included carry cases.

Proaim W5 Heavy-Duty Tripod Stand

Anchor your Proaim Wave-P5 jib with this W5 Heavy-Duty Tripod Stand for stable crane shots. Three legs feature double-locking knobs and a diameter of 1.6" . Its height can reach up to 42" , and its steel construction ensures it remains durable throughout its lifetime.

Jib Compatibility

Proaim Wave-5P 32 Jib

Proaim Power Pack

The Proaim Power Pack is a high-capacity power bank for powering 12V devices, such as tilt heads and sliders on set or at events. In a compact 13 x 10" Pelican case, the Power Pack provides two 4-pin XLR 12V power ports that can be used simultaneously. After 12 hours of charging over an integrated 2-prong power cord, the Power Pack will supply approximately five hours of power when working with a single device. An LED indicator on the outside lights up green when the Power Pack is fully charged, red when a low discharge level is reached, and yellow if there are any technical issues. When not in use, the 2-prong power cord can be retracted into the case.

Other Features

12V, 7Ah memory-free battery

100 to 240 VAC input voltage

Crushproof, dustproof, and water resistant (not waterproof)

Easy-open latch

No need to discharge completely before recharging

EAN: 672713836575

Proaim Gold Pan/Tilt Head with 12V Joystick Control Box

The Proaim Gold Pan/Tilt Head with 12V Joystick Control Box Is a motorized pan/tilt remote head for jibs and cranes. It can safely handle camera packages weighing up to 16.5 pounds, is capable of panning throughout 360° , and depending on camera configuration, it can also move 360° through the tilt axis.

The head has variable pan and tilt speeds, with a minimum speed of 6° per second for slow and languid pans and tilts. When more alacrity is necessary, the head has a maximum pan/tilt speed of 51° per second. Included with the head are the joystick controller, a short 4-pin XLR power cable for working from batteries, a 12V power supply, and a worldwide AC power converter. The included control cable is 49 long, allowing you to work on a wide variety of jibs and cranes.

EAN: 655003982800