Get that crane shot you need and put the crane on a dolly for added cinematic value with the Proaim 40 NILE Camera Crane Package. The package comes with a motorized head that can support up to 33 lb of camera and accessories, a joystick controller, a modular crane that can be expanded from 16 to 40 , a heavy-duty support tripod stand, and a dolly strong enough to support the weight of your crane.
Made from modular aluminum in a triangular design for increased strength, the modular crane breaks down into 13 sections for transport and storage purposes. Mounting on the included aluminum stand, the crane is a fully articulated piece of camera moving equipment, with a motorized pan/tilt head that moves 360° in both axes. The included controller allows you to move the head from as slow as two minutes and 40 seconds for a complete 360° pan/tilt to as fast as eight seconds with proper balancing of your camera. The included dolly makes gliding your crane along tracks possible. Please note that neither counterweights nor track are included with this package and must be sourced separately.
Proaim NILE Specs
Material of Construction | Arm: Aluminum Gears: Brass and Aluminum |
Axes | 2, Pan and Tilt |
Panning Range | 360° |
Tilting Range | 360° |
Load Capacity | 33 lb / 15 kg |
Rotation Speed | 360° Pan and Tilt: 5 to 20 Seconds |
Power Input | 100 to 240 VAC |
Power Output | 12 VDC |
Control Input | 1 x Male Tyco 1 x Female Tyco |
Head Height | 18.5 to 25.5" / 47 to 64.7 cm |
Weight | Head: 13.0 lb / 5.9 kg Controller Box: 17.6 lb / 8 kg |
In the Box
- Control Box
- Joystick Handle
- 12 VAC Power Adapter
- AC Power Cable
- 4-Pin Cable
- Head Cable
- Control Cable
- FIZ Assembly Kit
- FIZ Handle
- Carry Bag
- 2-Year Manufacturer Warranty
No posts found