EAN: 736902394465
The Secced 12M Superman Crane is a camera jib with 32.8` total arm length and 27.2` maximum lens height. The jib comes with a slip ring for remote head pan movement and is designed for an ENG camera with a Canon or Fuji lens.
The remote head has a maximum payload of 44 lb. You can control the pan and tilt movements of the remote head, adjusting the speed and damp of pan and tilt movements. It can control either Canon or Fuji lenses, offering both zoom/focus/iris control and zoom speed adjustments. It can also reverse the direction of zoom and focus.
The crane system features a tilt and pan lock for safety and comes with a heavy-duty tripod and dolly for stability. It comes with a base and post for added stability, and features a V-mount interface for attaching a battery. The crane system can be used in oes, concerts, reality shows, etc., for big studio or outdoor productions.
Secced Superman Specs
Construction | Steel and aluminum |
Payload Capacity | 44 lb / 20 kg |
Counterbalance System | Round weights |
Column | Distance from Column to End: 6.6` / 2 m |
Arm Reach | 32.8` / 10 m |
Tilt Lock | Yes |
Tilt Drag | Yes |
Pan Lock | Yes |
Spring Loaded Counter Balance | One setting |
Tilt Range | -55°/45° |
Tripod Attachment | Secced Crane specific |
Head Attachment | Not specified by the manufacturer |
Head Arm Leveling | Manual |
Leveling Indicators | None |
Height | Lens Height: 27.2` / 8.3 m (max.) 22.6` / 6.9 m (min.) |
Height | Column (with Tripod Dolly): 5.9` / 1.8 m |
Width | Dolly: 2.6` / 0.82 m |
Weight | Not specified by the manufacturer |
In the Box
- Secced 12M Superman Crane
- Remote Head
- Control Box
- Controller
- 2 x Lens Motor
- Lens Control Cable
- Lens Conversion Cable
- Lens Motor Frame
- 4 x Gear
- 2 x Supporting Plate
- 2 x Pin
- Monitor Plate
- 4 x Monitor Strap
- 2 x Power Cable
- 4 x Video Cable
- Power Supply Cable
- 2 x Arm Mounting Screw
- 4 x Head Mounting Screw
- Main Cable
- 10 x Bounding Strap
- 10 x Tube (#1-10)
- 4 x Steel Cable (31.5`)
- 3 x Steel Cable (23.6`)
- 6 x Steel Cable (39.3`)
- Central Column
- Crane Arm Frame
- Central Pivot Section
- 2 x Tension Part
- 2 x Tension Middle Rod
- 4 x Tension Side Rod
- 2 x Operating Rod
- 2 x Counterweight Plate
- 16 x M10 Screw
- 5 x M20X160 Screw
- 2 x 300X36 Spanner
- Spanner
- 2 x Axle Sleeve
- Dolly
- 8 x Dolly Screw
- Lens Motor
- 1/4"-20 Screw
- 3/8"-16 Screw
- Remote Head PCB
- 2 x M10x20 Screw
No posts found