Redrock Micro Halo Solo Complete Bundle

Redrock Micro Navigator 7-In-1 Command Module (Standalone)

The standalone Redrock Micro Navigator 7-In-1 Command Module is the heart of a control system that, with optional motors and cables, works as a mini FIZ (focus, iris, zoom) control unit. The two dampened finger wheels and joystick are dedicated lag-free finger controls for each individual channel (focus, iris, zoom). The Navigator also features a scroll wheel, an OLED screen and onboard LEDs for status display, as well as three function buttons. Please note, the Navigator does not include lens motors, motor cables, or camera control cables which must be sourced separately.

The Navigator powers from readily available LP-E6 batteries via its built-in battery plate. You can use cables to connect the Navigator to a camera or gimbals for wired control, or use the built-in wireless system that has a nearly one-mile range. In addition to the OLED display screen with live feedback of focus, iris, and zoom position, it also features LED indicators and haptic (vibrating) feedback. The MA?VI Pro API mode enables you to interface the Navigator to your MA?VI Pro.

Camera Control

• Canon
• RED
• Sony
• Panasonic
• Blackmagic Design
• ARRI
• LANC protocol

‹Please note, camera control requires optional cables not included with the Navigator.

Gimbal Control

• Freefly MA?VI
• DJI Ronin
• Compatible S.Bus gimbals

Freefly MA?VI Interface

Putting the Navigator into MA?VI Pro API mode enables you to directly connect to the MA?VI Pro and use it as a Solo Op (when plugged directly into the MA?VI Pro) or as a remote controller when connected to the Freefly Mimic for wireless access.

Features

• Mission Control: A real-time focus data display on smallHD monitors
• MetaTouch: Allows for lens discovery and configuration just by touching the lens
• Halo Explorer configuration and activation
• Orbit configuration and activation

Redrock Micro Atlas Smart Motor (Single Motor Standalone)

The Redrock Micro Atlas Smart Motor features a compact design with increased torque and resolution compared to Redrock s previous motors. This is the standalone configuration of the motor which includes a single motor with a removable 0.8 MOD drive gear. The included 15 to 19mm bushing allows you to mount the motor on either cine-rod standard. The motor features both manual and automatic calibration. Though small in size, it has many advanced features including rotating ports that make cabling easier, LED indicators, and an OLED display screen.

Well suited to either focus, iris, or zoom, the motors are hardwired and can be daisy-chained as each one can function without a separate control box or MDR, greatly saving you on weight. The motors also support Wi-Fi, RF, NFC, and S.Bus control for a truly flexible system. The free Eclipse mobile app makes setup and calibration a breeze.

• Works with virtually any camera and lens
• Removable 0.8 MOD drive gear
• Wireless-ready (2.4 GHz)
• No external brain/MDR/control/distribution box required
• Auto and manual calibration
• One-button push for auto calibration
• Adjustable torque
• Onboard LED and OLED for visual confirmation of status and configuration
• Rotating ports simplify cabling and rigging
• Hemo-style connectors eliminate cable mismatch
• Wide selection of add-on controllers ”solo op fingerwheel, mini FIZ, wireless remote, drone
• Included Eclipse mobile app for configuration and wireless remote focus control
• Mission Control-ready ”display real-time focus information on compatible smallHD monitors (not included)
• MetaTouch offers lens discovery and configuration for fast lens changes just by touching the lens

Redrock Micro Eclipse to D-Tap Power Input Cable (24 )

This Redrock Micro Eclipse to D-Tap Power Input Cable is 24 long and connects your Eclipse module to a D-Tap power source. The 4-pin push/pull connector ends create a strong and durable connection to your module, while the D-Tap connector end is standard for powering accessories requiring 12 to 14.8 VDC. The braided cable sheath protects the wires inside.

Redrock Micro Eclipse to Eclipse Cable (24 )

This Redrock Micro Eclipse to Eclipse Cable is 24 long and connects two Eclipse modules together. The 4-pin push/pull connector ends create a strong and durable connection suitable for use in production. Since the ends are the same, you can connect either end of the cable into any module. The braided cable sheath protects the wires inside.