CINEGEARS Pegasus Cable Cam System Overview
The Pegasus Cable Cam Body from CINEGEARS is the core of the Pegasus high-payload cable cam system. Add the necessary controller, wheels, mounting plates, and other components, all sold separately, and mount cameras or entire gimbal setups up to 17.5 lb. The Pegasus can be used as a cable cam as well as a dolly on flat surfaces, remotely controlled in both modes. The Pegasus supports up to two cables, one on each side, or you can loop just one around to serve as two cables supporting the same 17.5 lb. The maximum travel speed is 25" per second in cable mode and 39" in dolly mode. The maximum incline in cable mode is 35° . The maximum control range is 0.62 miles (3280') and there's no limit to the length of the cable that you can use. Multiple controllers can be synced to the same Pegasus unit. In dolly mode, the travel route can be programmed in various ways, including at an arc angle.
The Pegasus is designed with a highly responsive ultrasonic safety mechanism. Collision sensors trigger a complete stop instantly upon detection of physical interference along the travel path.
The Pegasus comes with a V-mount battery plate with a D-Tap port attached on top. It also features three onboard LEMO ports: a large 12-18 VDC, 8A input and two standard-size 12-18 VDC, 3.5A outputs. Between the D-Tap and LEMO ports, the Pegasus offers the flexibility to power most or all of your accompanying gear.
Key Features
- 17.5 lb payload
- Works as a cable cam system and as a dolly (optional components required)
- 25" per second max travel speed in cable mode
- 39" per second max travel speed in dolly mode
- 35° maximum incline
- Ultrasonic safety mechanism / highly responsive collision detection sensors
- Stainless steel and aluminum construction
- V-mount plate with D-Tap port
- 2-pin LEMO input/output ports
In the Box
- CINEGEARS Pegasus Cable Cam Body
- V-Mount Battery Plate
- 3-Year Manufacturer Warranty
No posts found
