EAN: 854821004859
The RigWheels Monorail Carriage Kit with Two Pipe Clamps enables you to hang your camera for overhead shots. Use this Carriage Kit with separately available PortaRail track, 1.25 speed-rail, or any tube/track 1-2 in diameter.
The Pipe Clamps in this modular system will mount on Baby or Junior light stands.
Features
Wheeled monorail carriage enables you to hang your camera for overhead shots
Pipe clamps fit Baby or Junior light stands
Use with PortaRail track, 1.25 speed-rail, or any tube/track 1-2 in diameter
RigWheels 10 PortaRail Traveler Kit with Soft Case
The 10a€² PortaRail Traveler Kit from RigWheels includes six 40 sections and six threaded connectors in a soft case. The 40 sections can be screwed together via the connectors to form two 10 long rails for the PortaRail collapsible dolly/slider rail system (not included). The soft case allows easy transport.
These rails are constructed from 6061 aluminum for rigidity and provide precision camera movement. At 80 the camera slider rails have less than 1/8 of flex with a 40 lb load placed at the center. These rods can also be used with other suspended or ground-rail systems that work with an outer diameter of 1.65 (41.9mm).
The dolly/slider is not part of the bundle and must be purchased separately.
RigWheels Monorail Hanger
EAN: 854821004866
The RigWheels Monorail Hanger is an inline support used as part of the Monorail Gimbal Slider system. The hanger fits between the screwed-in sections of your PortaRail track and does not interfere with the sliding of the carriage.
RigWheels Monorail Carriage Kit with Two Pipe Clamps Specs
| Dimensions and Weight | Not Specified by Manufacturer |
Packaging Info
| Package Weight | 4.885 lb |
| Box Dimensions (LxWxH) | 11.5 x 9.2 x 4.7" |
RigWheels 10` PortaRail Traveler Kit with Soft Case Specs
| Rod | Length: 40" (102 cm) each rod Outer Diameter: 1.65" (4.19 cm) |
Packaging Info
| Package Weight | 23.55 lb |
| Box Dimensions (LxWxH) | 42 x 8.4 x 5.1" |
RigWheels Monorail Hanger Specs
| Dimensions and Weight | Not specified by manufacturer |
Packaging Info
| Package Weight | 0.07 lb |
| Box Dimensions (LxWxH) | 8.5 x 5.6 x 0.25" |
In the Box
- Monorail Carriage
- 2 x Pipe Clamp for Light Stand
- 2-Year Manufacturer Warranty
- 6 x RigWheels PortaRail Camera Slider Rod (40" Section)
- 6 x RigWheels PRC1 PortaRail Connector
- Soft Case
- 2-Year Manufacturer Warranty
No posts found
