ARRI TRINITY 2 Upgrade Set for artemis Gen 1

The ARRI TRINITY 2 Upgrade Set for artemis Gen 1 enables you to transform your existing artemis stabilizer into a five-axis TRINITY system for camera rigs up to 66 lb. Upgrade components include the 16-pin TRINITY Head Gen 2, the BHM-2 Battery Hanger Module, the 16-pin TST-2 artemis Top Stage Gen 2, the TPD-2 Pendulum Gen 2, the RCP-3 Remote Control Panel, several baseplates, cabling, and more.

Use this upgraded stabilizer to create wide-ranging, revealing shots with high-to-low or vice versa moves. When held at a 45° angle and twisted left or right, the TRINITY can even be used to peek around corners. The compact TRINITY system is compatible with ARRI ALEXA LF, Mini LF, Mini, AMIRA, 235, and 416 cameras and third-party cameras with similar dimensions and form factors.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

ARRI TRH-2 Ring Main Cable (Standard, 25.6" )

The standard TRH-2 Ring Main Cable from ARRI is compatible with the TRINITY 2 stabilizers using the standard center post. This 25.6" cable is used to transmit high-capacity 12/24V power, data, LBUS, CAN Bus, tally, and one 12G-SDI video signal.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

TRINITY 2 stabilizers with a standard center post

ARRI DUB-3 Dovetail Utility Base

The ARRI DUB-3 Dovetail Utility Base is a compact version of the DUB-1 with the same tool-free clamping mechanism. Use it to mount any SAM (stabilizer adapter mount) dovetail on your TRINITY 2 or upgraded TRINITY Gen 1 stabilizer with QL.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARRI TRINITY Side-to-Side Fine Adjustment

The TRINITY Side-to-Side Fine Adjustment from ARRI enables precise camera positioning on your TRINITY stabilizer rig. This component is compatible with the TRINITY 2A and TRINITY Gen 1 stabilizers using the DUB-3 compact Dovetail Utility Base.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARRI Stabilizer Adapter Mount SAM-Zero

The Stabilizer Adapter Mount SAM-Zero is the standard camera plate for most ARRI Camera Stabilizer Systems products. This 10" plate enables most cameras with 3/8" -16 base threads to be safely mounted onto ARRI ARTEMIS 2, TRINITY 1 and 2, or MAXIMA stabilizers and ARRI SHR-3 or SRH-360 remote heads.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARRI

ARRI 24V Camera Power Gen 2 for ALEXA Mini & AMIRA (8-Pin, 27.6" )

Use the 24V Camera Power Gen 2 from ARRI to connect an ALEXA Mini or AMIRA to an ARTEMIS 2 or TRINITY 2 stabilizer. This 27.6" straight cable has a 7-pin 2B LEMO connector on one end and an 8-pin 2B LEMO on the other.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARRI

ARRI Camera Power Gen. 2, 4-Pin XLR, 12V Cable (27.6" , Straight)

Use the 12V Camera Power Gen 2 Cable from ARRI to connect a camera to your ARTEMIS 2 or TRINITY 2 stabilizer. This 27.6" cable has a straight 4-pin XLR connector on one end and a 7-pin 2B LEMO cable on the other.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARRI ARTEMIS 2 and TRINITY 2 stabilizers

ARRI Gimbal Handle Extender (1.37" )

Use the Gimbal Handle Extender from ARRI to extend the length of your artemis gimbal handle by 1.37" . This extender is compatible only with artemis gimbals with a bent round handle.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

ARRI Post Main Cable (3B, 16-Pin)

The Post Main Cable from ARRI is compatible with ARTEMIS 2 and TRINITY 2 stabilizers using the standard center post. This cable has a 16-pin 3B LEMO connector on each end and is used to transmit high-capacity 12/24V power, data, LBUS, CAN Bus, tally, and two 12G-SDI video signals.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARTEMIS 2 and TRINITY 2 stabilizers with the standard center post

ARRI TST-2 ARTEMIS Top Stage 2 (16-Pin)

The ARRI TST-2 ARTEMIS Top Stage 2 features a very compact design, high overall rigidity, and a futureproof modular design. The use of the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has also been improved with a newly developed clamping mechanism. The SAM dovetail plate can now be lifted from above, as well as from behind or the front.

This new design enables fore and aft adjustment from both sides and side-to-side positioning. Connectors include the main 3B 16-pin LEMO port and high-capacity 12 and 24V ports, plus two 12G video ports, battery data, LBUS and Can Bus throughput, and tally interfaces.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARRI TPD-2 TRINITY Pendulum Gen. 2

The clamp-on TPD-2 TRINITY Pendulum Gen. 2 from ARRI forms the lower weight base of the TRINITY Gen. 1 or TRINITY 2 stabilizer. Its rotating arm enables the mass of the pendulum to generate drop-down moves and to offset the weight of your camera in various stabilizer configurations. Four 3/8" -16 threads enable you to add a customized number of counterweights.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARRI TRINITY Gen. 1 and TRINITY 2 stabilizers

Customizable Counterweights

Use the four 3/8" -16 threads to attach a customized number of counterweights, depending on the weight of your camera rig

ARRI CW-1 Counterweight (5.3 oz)

The compact CW-1 Counterweight from ARRI enables you to add 5.3 ounces when balancing your artemis, MAXIMA, or TRINITY stabilizer, or the SRH-3 or SRH-360 remote head.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARRI 19mm CSS Clamp Bridge 52

The ARRI 19mm CSS Clamp Bridge 52 fastens onto a pair of 19mm rods on your stabilizer rig. This bridge is compatible with the TRINITY 2 battery hanger, TRINITY Gen 1 stabilizer, and artemis Gen 1 stabilizer.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

Compatibility

ARRI RCP-3 FS Can Bus Cable (10" )

Use this 10" RCP-3 FS Can Bus Cable from ARRI to connect the RCP-3 remote control panel to the TRINITY 2 Stabilizer.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.

ARRI 3mm Hex Key (0.11" Allen Wrench)

This 3mm Hex Key from ARRI can be used with ARTEMIS and TRINITY stabilizers and select camera accessories.

Note:

A controller, monitor system, batteries, and battery plates are not included and must be ordered separately.