EAN:811786030286
Though monitoring HD video signals outdoors can be difficult, the SmallHD 703 UltraBright On-Camera Monitor, with its 2200 cd/m bright backlight, overcomes this environmental difficulty. The 7 1920 x 1080 LCD provides a sharp image, ideal for focus pulling and image analysis on set and in the field. Another advantage of the high-brightness panel is the monitor s ability to preview HDR content. HDR preview extends the display s dynamic range to portray a greater range of brightness in the image.
A unibody aluminum exterior keeps the monitor durable yet lightweight, while also acting as a heatsink for the internal electronics. The LCD panel itself is protected by a layer of optically-bonded Gorilla Glass, notable for its transparency and toughness. The optical bonding process ensures that blacks are not washed out and reduces the harshness of reflections.
On the sides of the display are the SDI and HDMI I/O. Having dual SDI ports allows for A/B viewing of two different SDI signals, or the secondary port can be assigned as an output for sending an SDI signal downstream to another monitor, switcher, or wireless accessory. All the functionality of the monitor is available via the PageBuilder OS, which provides advanced functionality with a simple and efficient graphical user interface.
PageBuilder OS
PageBuilder OS is an intuitive graphical user interface (GUI) that puts all the advanced functionality of the 703 UltraBright at your fingertips. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, multiview, LUTs, and focusing aids on different pages . These pages can be easily flipped through using the joystick. The buttons on the front panel can also toggle monitoring tools on and off for each page.
ColorFlow 3D LUT Processing
To keep your images consistent from production through to post-production, ColorFlow allows you to import 3D LUTs and display the treated image side-by-side with the untreated image to correctly gauge exposure while visualizing what is being recorded by the camera. Side-by-side preview can also be used with the HDR preview function. Separate LUT-treated images can be sent downstream over SDI and HDMI so you can have the 703 UltraBright display a log image or LUT-treated image, while the director or client monitors connected to the outputs can receive images treated with a different LUT. An image capture function saves a still frame from the incoming video stream onto an SD card, and records the applied 3D LUT for post-production reference.
On-Set Problem Solving
PageBuilder OS has a dedicated Output Preview page which allows you to apply LUTs and other image adjustments specific to the output signal from the monitor. Whether you have your camera connected to the HDMI or SDI input on the 703 UltraBright, you are not limited by that protocol the 703 UltraBright cross-converts to ensure compatibility with downstream hardware.
HD Scopes
Fill the screen with up to three simultaneous scopes, including waveform, vectorscope, and histogram, while still being able to observe the camera feed.
Exposure Tools
Exposure Assist supports both ARRI and Spectrum based false color, with built in IRE guides for reference. Utilize 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras.
Customizable Focus Assist and Peaking Tools
As recording resolutions increase, so does the importance of focusing precision. With Focus Assist, you can highlight the areas that are in focus with a bright color. These highlights are easily visible on the fly for quick focus confirmation. Focus Peaking increases the sharpness of the image for a subtler focus confirmation without the need for bright outlines. The color and intensity of these tools are adjustable to fit your preference.
Versatile Frame Guides
Select standard markers and safety areas that can be overlaid on the display as lines or matte overlays, with custom opacity level and colors. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9, and Custom (user selectable).
Power Options
Separately available DV, V-Mount, or Gold Mount battery plates can be attached to the rear of the display. A mounted battery can power the monitor, as well as attached accessories, through the 12V LEMO pass-through connection.
ARRI artemis Monitor Bracket Gen. 2 for SmallHD (7 )
The artemis Monitor Bracket Gen 2 supports a SmallHD 703 7 monitor on your ARRI stabilizer rig. The expanded distance between the rods provides a more solid, compact mount, and the improved rod clamp and finer ARRI rosette support the monitor firmly. This bracket is compatible with ARTEMIS 2 and artemis Gen 1 stabilizers and fits both the 1.5 inner and 1.8 outer posts.
Compatibility
- artemis Gen 1 stabilizer
- ARTEMIS 2 stabilizer
- SmallHD 7 703 monitor
ARRI Monitor Power Cable (12V, LEMO 0B 2-Pin to 0B 2-Pin)
This ARRI Monitor Power is used to power a second Transvideo Starlite or SmallHD monitor on your stabilizer rig from a Tally System Gen. 2 host module. The 12V cable has a 2-pin LEMO connector on one end and a 2-pin LEMO on the other.
Compatibility
- Transvideo Starlite monitor
- SmallHD monitor
- ARRI Tally System Gen. 2 host module
SmallHD 703 UltraBright On-Camera Monitor Specs
Display
| Panel Type | TFT LCD |
| Display Size | 7.0" / 17.8 cm |
| Resolution | 1920 x 1080 |
| Aspect Ratio | 16:9 |
| Viewing Angle | Horizontal: 178° (89/89) Vertical: 178° (89/89) |
| Maximum Brightness | 2200 nits / cd/m2 |
| Contrast Ratio | 1200:1 |
| Bit Depth / Color Support | 10-Bit (1.07 Billion Colors) |
| Pixels Per Inch (ppi) | 323 ppi |
| Color Gamut | 70% |
| Image Controls | Blue Only, False Color, Focus Peaking, Image Flip, Pixel-to-Pixel Zoom, RGB Parade, Screen Markers, Waveform |
| Video I/O | 1 x BNC (3G-SDI) Output 1 x HDMI Output 1 x BNC (3G-SDI) Input 1 x HDMI Input |
| Embedded Audio | HDMI SDI |
| Audio I/O | 1 x 1/8" / 3.5 mm Headphone Output |
| Built-In Speaker | None |
| Power I/O | 1 x LEMO 2-Pin Input 1 x LEMO 2-Pin Output |
Format Support
| Video Format | SDI (10-Bit 4:2:2) 1080p: 23.98/24/25/29.97/30/50/59.94/60 1080PsF: 23.98/24/25/29.97/30 1080i: 50/59.94/60 720p: 23.98/24/25/29.97/30/50/59.94/60 480i 576i HDMI (8/10/12-Bit) 1080p: 23.98/24/25/30/50/59.94/60 1080PsF: 23.98/24/25/30 1080i: 50/59.94/60 720p: 23.98/24/25/30/50/59.94/60/100/119.88/120 576p: 50/100 480p: 59.94/60/119.88/120 480i: 59.94/60/119.88/120/239.76/240 576i: 50/100/200 |
Power
| DC Input Power | 6 to 34 VDC |
| Battery Type | None |
| Power Consumption | 13 W |
Mounting
| Mounting | 2 x 1/4"-20 Female |
Environmental
| Certifications | CE, FCC, IC, RoHS *as per Manufacturer |
| Operating Temperature | 0 to 100°F / -18 to 38°C |
| Storage Temperature | -4 to 120°F / -20 to 48.9°C |
General
| Dimensions | 4.9 x 8.4 x 1.1" / 12.4 x 21.3 x 2.9 cm |
| Weight | 1.7 lb / 748 g |
Packaging Info
| Package Weight | 2.4 lb |
| Box Dimensions (LxWxH) | 9.4 x 7.2 x 2" |
ARRI artemis Monitor Bracket Gen. 2 for SmallHD (7") Specs
General
| Compatibility | ARRI artemis Gen 1 Stabilizer ARRI ARTEMIS 2 Stabilizer SmallHD Monitor 703 |
Physical
| Mounting | 1 x 1.5/1.8" Post Clamp 1 x ARRI Rosette |
| Dimensions | Not Specified by Manufacturer |
| Weight | Not Specified by Manufacturer |
ARRI Monitor Power Cable (12V, LEMO 0B 2-Pin to 0B 2-Pin) Specs
General
| Compatibility | Transvideo Starlite Monitor SmallHD Monitor ARRI Tally System Gen. 2 |
Inputs / Outputs
| Connector 1 | 1 x LEMO 0B 2-Pin Male |
| Connector 2 | 1 x LEMO 0B 2-Pin Male |
Physical
| Color | Black |
| Cable Length | Not Specified by Manufacturer |
Packaging Info
| Package Weight | 0.085 lb |
| Box Dimensions (LxWxH) | 8.1 x 5.35 x 1.35" |
In the Box
- SmallHD 2-Pin LEMO to D-Tap Power Cable (36")
- 2-Year Manufacturer Warranty
No posts found
