ARRI ARTEMIS 2 Basic Set with Volt Post

ARRI Stabilizer Adapter Mount SAM-Zero

The Stabilizer Adapter Mount SAM-Zero is the standard camera plate for most ARRI Camera Stabilizer Systems products. This 10 plate enables most cameras with 3/8 -16 base threads to be safely mounted onto ARRI ARTEMIS 2, TRINITY 1 and 2, or MAXIMA stabilizers and ARRI SHR-3 or SRH-360 remote heads.

Compatibility

ARRI

• TRINITY 2, TRINITY Gen 1
• ARTEMIS 2
• SRH-3, SRH-360

ARRI 24V Camera Power Gen 2 for ALEXA Mini & AMIRA (8-Pin, 27.6 )

Use the 24V Camera Power Gen 2 from ARRI to connect an ALEXA Mini or AMIRA to an ARTEMIS 2 or TRINITY 2 stabilizer. This 27.6 straight cable has a 7-pin 2B LEMO connector on one end and an 8-pin 2B LEMO on the other.

For ARTEMIS 2 and TRINITY 2 only.

Compatibility

ARRI

• ALEXA Mini and AMIRA cameras
• ARTEMIS 2 and TRINITY 2 stabilizers

ARRI Camera Power Gen. 2, 4-Pin XLR, 12V Cable (27.6 , Straight)

Use the 12V Camera Power Gen 2 Cable from ARRI to connect a camera to your ARTEMIS 2 or TRINITY 2 stabilizer. This 27.6 cable has a straight 4-pin XLR connector on one end and a 7-pin 2B LEMO cable on the other.

Compatibility

ARRI ARTEMIS 2 and TRINITY 2 stabilizers

ARRI TST-2 ARTEMIS Top Stage 2 (16-Pin)

The ARRI TST-2 ARTEMIS Top Stage 2 features a very compact design, high overall rigidity, and a futureproof modular design. The use of the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has also been improved with a newly developed clamping mechanism. The SAM dovetail plate can now be lifted from above, as well as from behind or the front.

This new design enables fore and aft adjustment from both sides and side-to-side positioning. Connectors include the main 3B 16-pin LEMO port and high-capacity 12 and 24V ports, plus two 12G video ports, battery data, LBUS and Can Bus throughput, and tally interfaces.

Compatibility

• ARTEMIS 2 stabilizer
• TRINITY 2 stabilizer

ARRI Post Main Cable (3B, 16-Pin)

The Post Main Cable from ARRI is compatible with ARTEMIS 2 and TRINITY 2 stabilizers using the standard center post. This cable has a 16-pin 3B LEMO connector on each end and is used to transmit high-capacity 12/24V power, data, LBUS, CAN Bus, tally, and two 12G-SDI video signals.

Compatibility

ARTEMIS 2 and TRINITY 2 stabilizers with the standard center post

ARRI BST-2 ARTEMIS Bottom Stage Gen 2 (16-Pin LEMO)

Compatible with the ARRI ARTEMIS 2 camera stabilizer, the BST-2 ARTEMIS Bottom Stage Gen 2 features a compact design, improved overall rigidity, and a future-proof modular design. This bottom stage features a self-leveling OLED display, a future-proof, modular design, and both 12 and 24V high-capacity camera and system power. Its SAM dovetail system offers improved rigidity, and the 19mm rod support system helps counterbalance your rig.

ARTEMIS Gen 2 Component

Self-Leveling Display

SAM Dovetail System

New Clamp Mechanism

Three Battery Inputs

19mm Rod Support

Interface

• Interface connections include a 10-pin, 3B LEMO connector, high-capacity 12 and 24V ports, two 4G video ports, and a tally port
• LBUS and CAN bus throughput for various camera and lens accessories

ARRI BHM-2 to TST Power Cable with Battery Data (12/24V)

The BHM-2 to TST Power Cable from ARRI powers your ARTEMIS 2 or TRINITY 2 stabilizer through its top or bottom stage via the Battery Hanger Module (BHM). This cable passes battery data through to the BHM display and has a 7-pin, 2B LEMO connector on each end.

For ARTEMIS 2 and TRINITY 2 only.

Compatibility

• ARTEMIS 2 Stabilizer
• TRINITY 2 Stabilizer

ARRI 19mm Carbon Fiber Rod (Pair, 12 )

This pair of 12 Carbon Fiber Rods from ARRI is used for attaching 19mm rod-mounted accessories to your ARTEMIS 2 or TRINITY 2 stabilizer rig. The rods are made from lightweight yet strong carbon fiber, which helps reduce the overall weight of your rig while retaining rigidity.

Carbon Fiber

Constructed from lightweight yet durable carbon fiber

ARRI 19mm Carbon Fiber Rod (Pair, 4.7 )

This pair of 4.7 Carbon Fiber Rods from ARRI is used for attaching 19mm rod-mounted accessories to your ARTEMIS 2 or TRINITY 2 stabilizer rig. The rods are made from lightweight yet strong carbon fiber, which helps reduce the overall weight of your rig while retaining rigidity.

Carbon Fiber

Constructed from lightweight yet durable carbon fiber

ARRI Hinge for Battery Hanger Module 2 (19mm)

The redeveloped 19mm Hinge for Battery Hanger Module 2 from ARRI uses a finer ARRI rosette to enable more precise positioning of the batteries on your ARTEMIS 2 or TRINITY 2 stabilizer. Once the hinge is locked, the batteries are held securely without any play or vibrations. Use two of these hinges for increased creativity and freedom when positioning batteries on your ARTEMIS 2 or TRINITY 2.

ARRI BMS-2 Battery Mounting Base 2

Use the BMS-2 Battery Mounting Base 2 to support up to three batteries on your ARRI ARTEMIS 2 or TRINITY 2 stabilizer. This base uses separately available B-mount, Gold mount, or V-mount plates, enabling you to use the compatible batteries you have on hand.

Compatibility

• ARRI ARTEMIS 2 stabilizer
• ARRI TRINITY 2 stabilizer
• B-mount, Gold-mount, and V-mount plates and batteries

ARRI 3mm Hex Key (0.11 Allen Wrench)

This 3mm Hex Key from ARRI can be used with ARTEMIS and TRINITY stabilizers and select camera accessories.