ARRI ARTEMIS 2 Volt Shorty Post Basic Set

ARRI Artemis 2 Overview

Specially designed for use with a Steadicam Volt horizontal stabilization unit, the ARTEMIS 2 Volt Shorty Post Basic Set from ARRI has a post with a special outer diameter of 1.75" . This diameter is precisely matched to the inner diameter of the Steadicam Volt gimbal component, enabling easy mounting. No conversion or service technician is required to install the Steadicam Volt gimbal on the ARTEMIS 2 Volt post. This ARTEMIS 2 set comprises the short carbon fiber Volt post, top and bottom stages, 19mm support rods, BHM-2 battery hanger, two battery bases, CSS tool, and various cables.

ARRI Stabilizer Adapter Mount SAM-Zero

The Stabilizer Adapter Mount SAM-Zero is the standard camera plate for most ARRI Camera Stabilizer Systems products. This 10" plate enables most cameras with 3/8" -16 base threads to be safely mounted onto ARRI ARTEMIS 2, TRINITY 1 and 2, or MAXIMA stabilizers and ARRI SHR-3 or SRH-360 remote heads.

Compatibility

ARRI

• TRINITY 2, TRINITY Gen 1
• ARTEMIS 2
• SRH-3, SRH-360

ARRI ARTEMIS 2 Carbon Center Post for Volt (1.74" Diameter, Short)

The ARTEMIS 2 Carbon Center Post from ARRI has been specially developed for use with the Tiffen Volt gimbals. The dedicated outer 1.74" diameter is precisely matched to the inner diameter of the Volt, enabling easy mounting with no conversion or service technician needed for installation. Please note that this post does not incorporate a center cable.

Note:

Does not incorporate a center cable.

Compatibility

Tiffen Volt gimbals

ARRI 19mm Carbon Fiber Rod (Pair, 4.7" )

This pair of 4.7" Carbon Fiber Rods from ARRI is used for attaching 19mm rod-mounted accessories to your ARTEMIS 2 or TRINITY 2 stabilizer rig. The rods are made from lightweight yet strong carbon fiber, which helps reduce the overall weight of your rig while retaining rigidity.

Carbon Fiber

Constructed from lightweight yet durable carbon fiber

ARRI 19mm Carbon Fiber Rod (Pair, 12" )

This pair of 12" Carbon Fiber Rods from ARRI is used for attaching 19mm rod-mounted accessories to your ARTEMIS 2 or TRINITY 2 stabilizer rig. The rods are made from lightweight yet strong carbon fiber, which helps reduce the overall weight of your rig while retaining rigidity.

Carbon Fiber

Constructed from lightweight yet durable carbon fiber

ARRI Hinge for Battery Hanger Module 2 (19mm)

The redeveloped 19mm Hinge for Battery Hanger Module 2 from ARRI uses a finer ARRI rosette to enable more precise positioning of the batteries on your ARTEMIS 2 or TRINITY 2 stabilizer. Once the hinge is locked, the batteries are held securely without any play or vibrations. Use two of these hinges for increased creativity and freedom when positioning batteries on your ARTEMIS 2 or TRINITY 2.

ARRI TST-2 ARTEMIS Top Stage 2 (16-Pin)

The ARRI TST-2 ARTEMIS Top Stage 2 features a very compact design, high overall rigidity, and a futureproof modular design. The use of the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has also been improved with a newly developed clamping mechanism. The SAM dovetail plate can now be lifted from above, as well as from behind or the front.

This new design enables fore and aft adjustment from both sides and side-to-side positioning. Connectors include the main 3B 16-pin LEMO port and high-capacity 12 and 24V ports, plus two 12G video ports, battery data, LBUS and Can Bus throughput, and tally interfaces.

Compatibility

• ARTEMIS 2 stabilizer
• TRINITY 2 stabilizer

ARRI Post Main Cable (3B, 16-Pin)

The Post Main Cable from ARRI is compatible with ARTEMIS 2 and TRINITY 2 stabilizers using the standard center post. This cable has a 16-pin 3B LEMO connector on each end and is used to transmit high-capacity 12/24V power, data, LBUS, CAN Bus, tally, and two 12G-SDI video signals.

Compatibility

ARTEMIS 2 and TRINITY 2 stabilizers with the standard center post

ARRI BMS-2 Battery Mounting Base 2

Use the BMS-2 Battery Mounting Base 2 to support up to three batteries on your ARRI ARTEMIS 2 or TRINITY 2 stabilizer. This base uses separately available B-mount, Gold mount, or V-mount plates, enabling you to use the compatible batteries you have on hand.

Compatibility

• ARRI ARTEMIS 2 stabilizer
• ARRI TRINITY 2 stabilizer
• B-mount, Gold-mount, and V-mount plates and batteries

ARRI BST-2 ARTEMIS Bottom Stage Gen 2 (16-Pin LEMO)

Compatible with the ARRI ARTEMIS 2 camera stabilizer, the BST-2 ARTEMIS Bottom Stage Gen 2 features a compact design, improved overall rigidity, and a future-proof modular design. This bottom stage features a self-leveling OLED display, a future-proof, modular design, and both 12 and 24V high-capacity camera and system power. Its SAM dovetail system offers improved rigidity, and the 19mm rod support system helps counterbalance your rig.

ARTEMIS Gen 2 Component

This compact bottom stage is compatible with the ARRI ARTEMIS Gen 2 camera stabilizer

Self-Leveling Display

A self-leveling OLED display enables you to view your power status when working in both standard and low mode

SAM Dovetail System

A new clamp mechanism and a conversion to the ARRI SAM dovetail plate standard provide significantly higher rigidity

New Clamp Mechanism

The new clamping mechanism enables you to pick up the SAM dovetail plate from above, from the front, or from behind

Three Battery Inputs

The three inputs for separately available battery plates feature rotating connectors that enable easy cable management

19mm Rod Support

A 19mm rod support system provides a sliding counterbalance option

Interface

• Interface connections include a 10-pin, 3B LEMO connector, high-capacity 12 and 24V ports, two 4G video ports, and a tally port
• LBUS and CAN bus throughput for various camera and lens accessories

ARRI 24V Camera Power Gen 2 for ALEXA Mini & AMIRA (8-Pin, 27.6" )

Use the 24V Camera Power Gen 2 from ARRI to connect an ALEXA Mini or AMIRA to an ARTEMIS 2 or TRINITY 2 stabilizer. This 27.6" straight cable has a 7-pin 2B LEMO connector on one end and an 8-pin 2B LEMO on the other.

ript>

Note:

For ARTEMIS 2 and TRINITY 2 only.

Compatibility

ARRI

• ALEXA Mini and AMIRA cameras
• ARTEMIS 2 and TRINITY 2 stabilizers

ARRI Camera Power Gen. 2, 4-Pin XLR, 12V Cable (27.6" , Straight)

Use the 12V Camera Power Gen 2 Cable from ARRI to connect a camera to your ARTEMIS 2 or TRINITY 2 stabilizer. This 27.6" cable has a straight 4-pin XLR connector on one end and a 7-pin 2B LEMO cable on the other.

Compatibility

ARRI ARTEMIS 2 and TRINITY 2 stabilizers

ARRI 12G HD-SDI BNC Cable (25" )

The blue 25" 12G HD-SDI BNC Cable from ARRI is designed for use with artemis, TRINITY, and MAXIMA stabilizers and the SRH-3 remote head. This 4.5 GHz 12G video cable has a straight BNC male connector on one end and a right-angle BNC male connector on the other.

ARRI BHM-2 to TST Power Cable with Battery Data (12/24V)

The BHM-2 to TST Power Cable from ARRI powers your ARTEMIS 2 or TRINITY 2 stabilizer through its top or bottom stage via the Battery Hanger Module (BHM). This cable passes battery data through to the BHM display and has a 7-pin, 2B LEMO connector on each end.

Note:

For ARTEMIS 2 and TRINITY 2 only.

Compatibility

• ARTEMIS 2 Stabilizer
• TRINITY 2 Stabilizer