Easyrig Vario 5 with Cinema Flex Vest, Flowcine Serene & Serene Extension Preinstalled

Combine the support of your Easyrig vest with a spring stabilizer for creating smooth handheld shots while helping to avoid fatigue with the Easyrig Vario 5 with Cinema Flex Vest, Flowcine Serene & Serene Extension Preinstalled. The included Cinema Flex vest with a standard arm provides support and helps shift the weight of your rig away from your arms, providing a surprising amount of movement. The spring-loaded standard arm helps smooth vibrations as you carry and move your camera. The included Serene and extension come preinstalled, saving you the need to drill and mount it yourself, and it helps reduce vibration in the vertical and side-to-side axes. The extension includes a spring that supports up to 33 lb at maximum extension.

Easyrig Vario 5 Standard Cinema Flex Vest with Standard Top Bar

Save your back with the Vario 5 Standard Cinema Flex Vest with Standard Top Bar from Easyrig. Using a suspension line to support a camera rig weighing 11 to 38 lb, this system takes the load off your shoulders, neck, and arm muscles and distributes it across your torso. This lets you shoot for longer periods of time without worrying about arm fatigue. The system consists of a Standard Cinema Flex vest, a Vario 5 shock absorber, and a standard top bar. Also included is a carrying bag for convenient storage and transport of the Easyrig system.

Features

• 11 to 38 lb load capacity
• Standard Cinema Flex vest with reinforced upper chest for female operators
• Standard top bar
• Standard lockable camera hook (quick release hook available separately)
• Includes two 3/8" -16 and two 1/4" -20 ball studs that can be fastened to a camera, camera cage, or camera handle
• Vest and waist belt made of breathable material
• Made in Sweden

FLOWCINE Serene

The FLOWCINE Serene is a two-axis spring arm stabilizer that attaches at the end of the Easyrig (2/2.5/3/Vario 5) arm. It smooths video results by mitigating vertical vibrations induced by walking or running during a tracking shot. It also stabilizes side to side motion in similar tracking situations by counter-pivoting around its center axis. The Serene also allows for full use of the Easyrig spring extension for going from high to low mode.

The Serene supports rigs weighing between 14 and 44 pounds, and the spring tension can be fine-tuned without the use of tools. It works well with the separately available FLOWCINE Gravity One as well as other gimbal rigs like the Freefly MVI.

Please note: This product requires a permanent modification that involves partial disassembly of and drilling into the Easyrig. This may void the warranty on your Easyrig.

Modifies Your Existing Easyrig

The Serene mounts at the very end of the Easyrig arm, and the string is routed upwards and through the Serene instead of the normal way straight down from the tip of the Easyrig. To make this happen, you have to modify your Easyrig arm by drilling one or two holes depending on Easyrig model. A drilling template is included for the exact placement of the holes.

FLOWCINE 2.2 - 4.5" Extension Arm for Serene 2-Axis Spring Arm

The FLOWCINE Extension Arm adds 2.2 to 4.5" to the Serene 2-Axis Spring Arm in less than 1/2" increments, which allows a much longer boom range and smoother performance in vertical stabilization. It comes with extra heavy-duty spring for Serene to allow maximum load of 33 lb at maximum extension and 43 lb at minimum extension.