Capture professional, smooth camera movements by flying your rig with the goofy (tight-side) xSPINE Vest and xR3ACH Bundle from FLOWCINE. The camera`s weight is distributed to the shooter`s torso, and the spring cores of the articulating stabilization arm enable your rig to float through the set, creating an immersive experience for the audience as it follows your subject through the scene. This bundle comes configured in goofy setup, which features right-side mounting for left-handed operation.
The xSPINE fits all body types and allows you to support a stabilizer rig and save stress on the back and shoulders. The included xR3ACH arm provides a support arm for other stabilizers, and it also can be used as a stabilizer arm on its own. It includes three swappable spring cores to support loads from 37 to 64 lb, and there are small, medium, and large middle brackets included to finely adjust the mounting block position. A carry case with custom-cut foam is included to store the components.
FLOWCINE xSPINE Front Mount
Camera operators who would like to attach a stabilization arm to their xSPINE vest can do so via this xSPINE Front Mount from FLOWCINE, which extends a standard universal socket block to the shooter`s left or right. This enables it to be connected to a variety of support arms, including models from GPI Pro, Tiffen, or the xARM from FLOWCINE.
The mount can slide down on the vest`s vertical rails to create a lower center of gravity, clamped in a position usually blocked by the belt buckles of many competitors` stabilizer vest systems. With its adjustable height and ambidextrous design, the front mount can be customized to be used by multiple shooters as it is passed between the A, B, and C cameras.
Mount Stabilization Arms onto xSPINE
The xSPINE Front Mount extends its universal socket block off to the shooter`s side, allowing proper alignment when attaching an existing stabilization arm. It is compatible with reputable manufacturers like Tiffen and GPI Pro, along with another product in the xSPINE array, the xARM.
Customizable Height
The front mount is designed to slide up and down along the center rails of the xSPINE, enabling the camera operator to choose a height that is most comfortable. Particularly at its lowest position, the mount provides ample room for the stabilization arm to move freely.
Regular or Goofy
The front mount can be secured either regular or goofy, accommodating both left- and right-handed shooters.
FLOWCINE xSPINE Vest and xR3ACH Bundle (Goofy) Specs
Stabilizer Type | Vest System |
Load Capacity | 37 to 64 lb / 16.8 to 29 kg |
Weight | 9.9 lb / 4.5 kg |
Counterweights | None |
Vest Weight | 8.6 lb / 3.9 kg |
Material of Construction | Aluminum, Carbon Fiber, Stainless Steel |
FLOWCINE xSPINE Front Mount Specs
General
Compatibility | FLOWCINE xSPINE |
Physical
Mounting | Side: 2 x 3/8 "-16 UNC Side: 1 x Standard Universal Socket Block |
Dimensions | Not Specified by Manufacturer |
Packaging Info
Package Weight | 1.46 lb |
Box Dimensions (LxWxH) | 10.5 x 5 x 2.2" |
In the Box
- FLOWCINE xSPINE Vest
- xR3ACH Stabilizer Arm (Goofy)
- Blue Spring Core (37 to 49.5 lb)
- Orange Spring Core (44.5 to 56 lb)
- Purple Spring Core (52 to 64 lb)
- Small Middle Link Bracket
- Medium Middle Link Bracket
- Large Middle Link Bracket
- 4-Point Tool
- Ratchet Wrench
- Hex T-Handle
- Bottle of Maintenance Fluid
- Peli AIR 1555 Case with Custom Foam
- 2-Year Manufacturer Warranty
No posts found