FLYCAM 5000 Stabilizer with Sliding QR Platform, Table Clamp, Arm Brace, and Comfort Arm & Vest

This bundle combines the FLYCAM 5000 Video Camera Stabilizer with a cushioned Arm Brace and Comfort Arm & Vest for an enhanced stabilization workflow with the FLYCAM 5000. While the vest distributes all the weight to your torso and hips, the arm brace additionally provides better grip and control over the stabilizer. If for certain applications you choose to work without the arm and vest, the arm brace alone will distribute the weight across your forearm, reducing arm stress and fatigue. The vest is designed to fit men and women and is adjustable between 28 and 60" waist sizes.

The FLYCAM 5000 supports up to 11 lb loads and allows for stabilized pan, tilt, and roll motion as you move around in different directions. Included with the stabilizer is a Unico quick release sliding camera platform with a drop-in quick release plate. You can balance your camera with the supplied 16 counterweight plates plus via the sliding camera platform for a more efficient workflow. The included table clamp provides a mounting point for balancing the stabilizer as well as setting it down when not in use.

FLYCAM HD-5000 Video Stabilizer with Quick Release Plate and Table Clamp

Capture smooth, steady footage with a variety of cameras up to 11 lb with the HD-5000 Video Stabilizer from FLYCAM. Featuring a three-axis gimbal and foam handgrip, this stabilizer makes it easy to capture professional-looking handheld footage, and it can easily be used for panning, tilting, booming, or running. The stabilizer is made of lightweight aluminum and weighs only 3 lb.

The HD-5000 stabilizer has a dynamic camera balance platform that allows balancing the camera on its X and Y axes, and it features a toolless 21 to 29" telescoping center post for balancing camera rigs up to 11 lb. The included quick release plate installs on the top plate and has 1/4" -20 and 3/8" -16 screws to mount a variety of cameras.

Also included are sixteen counterweights that stack onto the 11.5 to 17.2" adjustable baseplate to ensure a perfect balance. A table clamp provides a mounting point for the gimbal for balancing and for storing the balanced, assembled gimbal when not in use.

Aluminum camera stabilizer with 11 lb load capacity

X- and Y-axis adjustments on camera platform

Sixteen counterweights that stack onto the 11.5 to 17.2" adjustable baseplate for balancing

Telescoping two-section center post from 21 to 25"

Quick release camera plate with 1/4" -20 and 3/8" -16 camera mounting screws

Table clamp for balancing your camera on the gimbal and storing when not in use

EAN: 718117847660

FLYCAM Arm Brace Support for Select Mechanical Stabilizers

The FLYCAM Arm Brace Support wraps around the arm, securing by hook-and-loop fasteners, and provides a metal post for mounting select mechanical stabilizers. It supports the FLYCAM 3000, 5000, and Nano, as well as many 3rd-party models. Providing cushion comfort while distributing the weight of the stabilizer over your forearm, it reduces arm stress and fatigue and allows for easier and more controlled handling of the stabilizer.

The metal post on the end measures 0.72" in diameter on top and 0.85" on the bottom. The control handle of the stabilizer mounts directly on top of this post. Any handle that meets these diameter measurements is compatible. With your hand over the stabilizer handle, you can then operate the stabilizer with better stability. The handle doesn t need to be secured in any way but rather just slides on from the top. The arm brace can be worn over the left or right arm and fits virtually all arm sizes.

FLYCAM Comfort Arm Vest Support for Camera Stabilizers

The FLYCAM Comfort Arm Vest Support for Camera Stabilizers is a body-mounted camera-stabilization system that lets you walk, run, climb stairs, and much more with loads up to 11 lb. It features a convertible mounting post that supports sleds that accept 13, 19, or 22mm posts, allowing you to use the vest and arm with FLYCAM and third-party stabilizing sleds. The system features both a small and large extension arm to allow the operator to select how close to their body the sled rides.

The vest by itself supports up to 39.7 lb, so between the included arm and your camera, it can easily support the weight of your sled and camera. The vest fits both men and women, and it adjusts to fit waist sizes from 28 to 60" , with 6" of vertical adjustment. Hook-and-loop and snap buckles make it easy to get in and out of, as well as adjust the size to fit. The spring arm supports loads up to 11 lb, and the tension is easily adjustable by a built-in knob so you can fine-tune the arm s tension to match the needs of the shot.

The arm can attach to the vest for either right- or left-handed operation

The support post is reversible from 13 to 19mm, and an included bushing converts that to 22mm for use with FLYCAM or third-party sleds

EAN: 718117847639