FLYCAM HD-3000 Stabilizer with Sliding QR Platform, Table Clamp, and Comfort Arm & Vest

FLYCAM HD-3000 Video Camera Stabilizer with Quick Release Plate and Table Clamp

EAN: 687748965879

Capture smooth, steady footage with a variety of cameras up to 8 lb with the HD-3000 Video Stabilizer from FLYCAM. Featuring a three-axis gimbal and foam handgrip, this stabilizer makes it easy to capture professional-looking handheld footage, and it can easily be used for panning, tilting, booming, or running. The stabilizer is made of lightweight aluminum and weighs only 2.6 lb.

The HD-3000 has a dynamic camera balance platform that allows balancing the camera on its X and Y axes, and it features a toolless 15.7 to 23.6 telescoping center post for balancing camera rigs up to 8 lb. The included quick release plate installs on the top plate and has 1/4 -20 and 3/8 -16 screws to mount a variety of cameras.

It comes with sixteen counterweights that stack onto the adjustable base to ensure a perfect balance. A table clamp provides a mounting point for the gimbal for balancing and for storing the balanced, assembled gimbal when not in use.

Aluminum camera stabilizer with 8 lb load capacity

X- and Y-axis adjustments on camera platform

Sixteen 3.2 oz counterweights for balancing on the 9.5 to 14.5 adjustable base platform

Telescoping two-section center post from 15.7 to 23.6

Quick release camera plate with 1/4 -20 and 3/8 -16 camera mounting screws

Table clamp for balancing your gimbal and to store when not in use

FLYCAM Comfort Arm Vest Support for Camera Stabilizers

EAN: 718117847639

The FLYCAM Comfort Arm Vest Support for Camera Stabilizers is a body-mounted camera-stabilization system that lets you walk, run, climb stairs, and much more with loads up to 11 lb. It features a convertible mounting post that supports sleds that accept 13, 19, or 22mm posts, allowing you to use the vest and arm with FLYCAM and third-party stabilizing sleds. The system features both a small and large extension arm to allow the operator to select how close to their body the sled rides.

The vest by itself supports up to 39.7 lb, so between the included arm and your camera, it can easily support the weight of your sled and camera. The vest fits both men and women, and it adjusts to fit waist sizes from 28 to 60 , with 6 of vertical adjustment. Hook-and-loop and snap buckles make it easy to get in and out of, as well as adjust the size to fit. The spring arm supports loads up to 11 lb, and the tension is easily adjustable by a built-in knob so you can fine-tune the arm s tension to match the needs of the shot.

The arm can attach to the vest for either right- or left-handed operation

The support post is reversible from 13 to 19mm, and an included bushing converts that to 22mm for use with FLYCAM or third-party sleds