Glidecam X-45 Stabilizer Sled with V-Mount Base
EAN: 674330200463
The Glidecam X-45 Stabilizer with V-Mount Base is a professional, body-mounted camera stabilizer designed for film or video cameras weighing up to 45 pounds. The system allows the operator to walk, run, ascend or descend stairs, shoot from moving vehicles, and travel over uneven terrain without camera instability.
Glidecam X-45 Sled
The full-featured, precision support Glidecam X-45 sled is designed to carry film and video cameras weighing up to 45 pounds and incorporates 12-volt integrated wiring.
Adjustable Precision Head
The precision, x-y adjustable head assembly incorporates a drop-in style dovetail camera plate for quick front-to-back balance. Finely tuned ergonomic knobs control front-to-back and side-to-side balance adjustments.
No Tools Engineering
The sled s no-tools precision gimbal incorporates four bearings inside the handle-to-yoke connection (the tilt axis). There are two bearings on each side of the yoke, providing four bearings for the roll axis. A very tight knurling has been machined onto the gimbal tube to improve handling, with the handle grip covered by easy-to-replace soft foam.
Rigid Telescoping Post
The Glidecam X-45 sled sports a solid 1.75 central post and a no-tools telescoping post. This allows for easy adjustment of the sled length and position of the LCD and batteries.
Dedicated Connectors
Three dedicated video BNC connections are located on the base and head assembly. The Glidecam X-45 central post power/video cable can handle composite, component, and HD-SDI video. Two 2-pin LEMO connectors are also located on the base and head assembly.
L-7 Pro 7 LCD Monitor
The optional Glidecam L7-Pro 16:9/4:3 switchable LCD monitor is a great option for this gimbal as it weighs only 14 ounces, is daylight viewable, and can be used attached to the sled or directly on top of your camera as an oversized viewfinder. The L-7 Pro is not included with the gimbal and must be sourced separately.
EAN: 674330200463
The Glidecam X-45 Stabilizer with V-Mount Base is a professional, body-mounted camera stabilizer designed for film or video cameras weighing up to 45 pounds. The system allows the operator to walk, run, ascend or descend stairs, shoot from moving vehicles, and travel over uneven terrain without camera instability.
Glidecam X-45 Sled
The full-featured, precision support Glidecam X-45 sled is designed to carry film and video cameras weighing up to 45 pounds and incorporates 12-volt integrated wiring.
Adjustable Precision Head
The precision, x-y adjustable head assembly incorporates a drop-in style dovetail camera plate for quick front-to-back balance. Finely tuned ergonomic knobs control front-to-back and side-to-side balance adjustments.
No Tools Engineering
The sled s no-tools precision gimbal incorporates four bearings inside the handle-to-yoke connection (the tilt axis). There are two bearings on each side of the yoke, providing four bearings for the roll axis. A very tight knurling has been machined onto the gimbal tube to improve handling, with the handle grip covered by easy-to-replace soft foam.
Rigid Telescoping Post
The Glidecam X-45 sled sports a solid 1.75 central post and a no-tools telescoping post. This allows for easy adjustment of the sled length and position of the LCD and batteries.
Dedicated Connectors
Three dedicated video BNC connections are located on the base and head assembly. The Glidecam X-45 central post power/video cable can handle composite, component, and HD-SDI video. Two 2-pin LEMO connectors are also located on the base and head assembly.
L-7 Pro 7 LCD Monitor
The optional Glidecam L7-Pro 16:9/4:3 switchable LCD monitor is a great option for this gimbal as it weighs only 14 ounces, is daylight viewable, and can be used attached to the sled or directly on top of your camera as an oversized viewfinder. The L-7 Pro is not included with the gimbal and must be sourced separately.
Glidecam X-45 Specs
| Stabilizer Type | Vest System |
| Counterweights | None |
Packaging Info
| Package Weight | 25 lb |
| Box Dimensions (LxWxH) | 26 x 18 x 14" |
In the Box
- Glidecam X-45 Stabilizer Sled with V-Mount Base
- Glidecam X-45 Sled
- Sled and Telescoping Base
- Docking Bracket
- Dovetail Plate
- Camera Power Cable
- 2 Year Manufacturer Warranty
No posts found
