SmartSystem Matrix One R2 Lite Bundle (V-Mount)

Add a complete vest, arm, and sled stabilizer system to your DJI Ronin 2 or other gimbal rigs with this Matrix One R2 Lite Bundle from SmartSystem. The R2 bundle includes the Arm X1, the Vest Lite, and the Matrix Sled R2 Lite, which includes an LCD monitor bracket, a V-mount battery plate, a docking bracket, an adjustable carbon fiber center post, and a hard-shell case with custom foam to carry the entire kit.

The heavy-duty Sled R2 Lite offers gimbal mounting designed for the DJI Ronin 2, or it can run in standard gimbal mode, and it includes a V-mount battery plate for power at the base, and the camera or gimbal mounts onto the micrometric camera platform. The slim aluminum Arm X1 provides a sturdy stabilizer arm that features advanced damping and a standard stabilizer mounting post, and it has interchangeable springs for different levels of tension to support loads up to 9.92 lb. The arm mounts onto the Vest Lite for right- or left-handed operators, and the quick release vest features foam padding, weight distribution, and washable fabric parts.

The LCD bracket allows you to mount your camera monitor, so your monitor view is always balanced with your camera setup. The whole system fits into the included wheeled hard-shell case that features IP67 water resistance, a pressure release valve, a folding pull handle, and custom-cut foam.

SmartSystem Matrix R2 Sled Lite (V-Mount)

Add professional-level stability and smoothness to your videos when using the DJI Ronin 2 gimbal stabilizer with this Matrix R2 Sled Lite from SmartSystem. The Matrix R2 Lite sled is designed to stabilize your camera footage when mounted on the DJI Ronin 2 gimbal, and it differs from the Matrix R2 as it is designed to use a smaller monitor with your rig, and this rig comes with a small counterweight set. The sled features a telescoping carbon fiber center post, a micrometric head, a monitor LCD holder, a V-mount battery plate, a Ronin 2 plate adapter, a Ronin 2 battery holder, a Ronin 2 yaw lock, an extended docking bracket, a U-bracket, a counterweight plate, ten counterweights, and a hard-shell carry case for the entire system.

The micrometric head allows you to mount the gimbal on the top or bottom of the sled to create a variety of shooting angles. The carbon fiber center post is height adjustable for working in a variety of production environments, and it features a docking bracket to dock the sled for balancing or for when it s not in use. The monitor mount allows you to install and adjust an onboard monitor to the system. The U-bracket allows you to distance the sled from an optional stabilizing arm or vest. The counterweight with ten counterweights mounts onto the bottom to help balance a heavier rig setup.

The V-mount battery plate mounts on the bottom rods and runs power up through the center column to the head, so you don t have to run a mess of external cabling. The sled can be broken down and stored in the included hard-shell carry case.

Lightweight sled-style stabilizer for DJI Ronin 2 camera rigs

Adjustable carbon fiber center column

LCD monitor holder

V-mount battery adapter plate

Ronin 2 battery holder, plate adapter, and yaw lock

Extended docking bracket to dock and store the sled for balancing or when not in use

U-bracket to increase the distance of the sled from the arm, making it possible to use your preferred monitor on the sled handle

R2 counterweight plate with 10 counterweights

Hard-shell carry case included

SmartSystem Arm X1 Professional Stabilization Arm

Fly your cine camera with precision and confidence using the Arm X1 Professional Stabilization Arm from SmartSystem. Its fine-tuning system enables you to perfectly match the mass of your rig with the appropriate level of resistance, resulting in the state of equilibrium known as critical damping.

Its 7075 aluminum alloy, rated higher than aircraft-grade, has the Brinnell hardness, fatigue strength, and tensile strength of carbon steel yet without the weight. It is outfitted with an industry-standard mating block that can easily be switched from regular to goofy.

High-Grade 7075 Aluminum Alloy

The Arm X1 is constructed from 7075 aluminum, which is classified as superior to aircraft-grade aluminum. It has a Brinnel hardness, fatigue strength, and tensile strength over 60% higher than those of 6082 high-quality aluminum.

Fine-Tuned Resistance

A force-multiplier control enables the user to precisely match the resistance with the mass of your rig. This on-the-go capability comes in handy when doing a lens swap, removing a matte box, or other alterations that affect the mass of the payload. Finding the balance between too much resistance, which produces oscillations, and too little, which creates a lagging effect, is made simple by the Arm X1 s XTune system.

Payload Range of 13.2 to 74.9 lb

The arm supports a 60 lb weight range, suitable for a wide array of rigs.

Boom Range

The Arm X1 has a boom range of 28.5" , enabling you to raise the camera for a high-angle shot, or lower it down to shoot up at a subject.

Italian Manufacturing

Every component of the Arm X1 is machined in the company s own factory in Italy.