Add professional-level stability and smoothness to your videos with this Matrix Sled Chimera (Gold Mount) from SmartSystem. The Matrix Extreme sled is designed to stabilize large cinema camera rigs with its impressive gyro, while the Volt s active roll analysis push the gyro towards a perfectly level horizon.
Avoid underpower-induced vibrations with the dedicated power line from the C-battery. Stick your landings with consistency by presetting an angle for the Volt to find as you finish your move.
Lightweight sled-style stabilizer for large cinema camera rigs
Active analysis of the roll angle by the Volt, instructing the sled s gyro to maintain a perfect horizon
Maintains neutrality when stopping and cornering
Adjustable carbon fiber center column with toolless setup and adjustment
Smarthead adjustable fluid camera platform
LCD monitor holder
Dual Gold mount battery adapter plate
Additional third Gold mount plate on the bottom for added power and counterweight
Mount onto a stabilizer arm such as the ARM X1 or X-LITE with the attached pin-style mount
Provides the ability to add up to 10 counterweights, weighing up to 8 oz each
Docking bracket to dock and store the sled for balancing or when not in use
Power camera and accessories with 14.8 VDC 2- and 4-pin LEMO-type outputs
Tally and BNC video pass-through connectors
Hard-shell carry case included
SmartSystem Matrix Sled Specs
Stabilizer Type | Single-Grip Handheld |
Camera Mount | Camera Plate |
Center Column Diameter | 1.6" / 40.0 mm |
Number of Sections | 2 |
Weight | 12.1 lb / 5.5 kg |
Power I/O | 2 x LEMO 2-Pin (14.8 VDC) Output 1 x LEMO 4-Pin (14.8 VDC) Output |
Video | 1 x BNC Input/Output |
Counterweights | 10 x 8 oz / 227 g |
Battery Type | 3 x Gold Mount |
Material of Construction | Carbon Fiber |
In the Box
- SmartSystem Matrix Sled Chimera (Gold Mount)
- Camera Sled
- Smarthead Camera Platform
- 2-Section Carbon Fiber Center Post
- Dual Gold Mount Battery Plate
- C-Battery Gold Mount Battery Plate
- 10 x Counterweight (8 oz)
- Docking Bracket
- LCD Monitor Mount
- Hard-Shell Carry Case
- 2-Year Manufacturer Warranty (Volt System)
No posts found