ARRI ALEXA Mini LF Accessory Set 15mm Advanced

ARRI Bottom Dovetail Plate (12" / 300mm)

Less is more when you re lugging your rig around, so opt for this 12" Bottom Dovetail Plate from ARRI with a weight-reducing cutout design for balancing your camera setup. This updated dovetail offers a medium travel range suitable for prime lenses, and it sports several features that distinguish it from earlier models.

Safety release buttons are located both at the front and back of the dovetail. The front release is especially helpful when using accessories like lens motors that may hang below the level of the baseplate, preventing an easy backward slide off the dovetail. Two removable stopper screws provide additional security when desired and can be parked on the plate when not in use.

Constructed of a robust aluminum alloy, this dovetail has built-in 3/8" -16 and 1/4" -20 threads for mounting on a tripod or quick release plate.

Compatible Heads

Including but Not Limited to:

O Connor 2060, 2575, 120EX
Sachtler Cine 30

Features

Use with a separately available sliding bridge plate or sled to balance your camera rig

Includes safety release buttons on both ends for maximum flexibility

The two removable stopper screws can be stored on the plate when not in use

Both 3/8" -16 and 1/4" -20 threads for mounting on a tripod quick release plate or other support

Robust yet lightweight aluminum alloy build

ARRI Rear Accessory Bracket RAB-1

The ARRI Rear Accessory Bracket RAB-1 is designed to mount accessories like battery plates or power-splitting boxes to the ALEXA Mini camera body. This curved bracket screws onto the camera providing a rib-like structure on which to attach a power solution. Use the RAB-1 bracket with the separately available RAB-1 Clamp to attach an ARRI Power Splitting Box, or a BAP-1 Battery Adapter Plate.

ARRI RAB-1 Clamp 2

Designed for use with the ALEXA Mini LF camera, the ARRI RAB-1 Clamp 2 is an updated version of the earlier RAB-1 Clamp. The Clamp 2 mounts an ARRI battery plate or power-splitting box further on the left to accommodate the second row of connectors on the rear of the ALEXA Mini LF.

Part of a modular accessory support system, the Clamp 2 is used with the separately available RAB-1 Rear Accessory Bracket. This clamp features a locking mechanism for additional security.

Compatibility

ARRI ALEXA Mini LF camera

ARRI HEB-3 Handle Extension Block for Center Camera Handle

Attaches to the ALEXA Center Camera Handle (CCH-1) or any 3/8 inch-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1), the tape hook is exactly in the sensor plane. Includes 3x 3/8 inch-16 UNC threaded mounting points.

ARRI SAB-1 Side Accessory Bracket for ALEXA Mini

The ARRI SAB-1 Side Accessory Bracket fits onto an ALEXA Mini adapter plate, providing multiple points for attaching accessories to the camera (adapter plate available separately). In addition to 3/8" -16 and 1/4" -20 threaded holes, the SAB-1 provides interfaces for attaching the RMB-3 Rod Mounting bracket and MSB-1 Mini Side Brackets. The SAB-1 Bracket can be mounted to an MAP-1 or MAP-2 ALEXA Mini Adapter Plate, the Mini Broadcast Plate, or the CBP-1 Compact Bridgeplate.

Features

Attaches to the ARRI ALEXA Mini via an adapter plate (available separately)

Provides multiple 3/8" -16 and 1/4" -20 accessory mounting points

Can be used to mount the RMB-3 Rod Mounting Bracket and MSB-1 ALEXA Mini Side Brackets

Attaches to an MAP-1 or MAP-2 ALEXA Mini Adapter Plate, the Mini Broadcast Plate, or the CBP-1 Compact Bridgeplate (all available separately)

ARRI Rod Mounting Bracket (RMB-3)

Use the Rod Mounting Bracket (RMB-3) from ARRI to support a single, standard 19mm rod for mounting a lens motor, lightweight EVF bracket, etc. to your camera or cage rig. When used with a separately available insert, the RMB-3 can be used to support a 15mm rod. A mounted rod is easily secured using the thumb lever on this screw-in bracket.

Rod Compatibility

19mm
15mm (with separately available insert K2.66255.0)

ARRI 15mm Reduction Insert for 19mm Rod

The ARRI 15mm Reduction Insert is used to adapt a 19mm rod bracket to accept standard 15mm rods. This insert works with any 19mm rod mount.

ARRI MVB-1 Viewfinder Mounting Bracket for ALEXA Mini

Use the ARRI MVB-1 Viewfinder Mounting Bracket to mount the MVF-1 electronic viewfinder to an ALEXA Mini camera. This bracket provides adjustable positioning of the EVF via 15mm LWS rods and the viewfinder mount. The separately available MAP-2 adapter plate is required for 15mm rod support on the ALEXA Mini.

Compatible Cameras

ALEXA Mini

ARRI CCH-2 Center Camera Handle

Expand your options for mounting HD camera accessories like monitors, transmitters, mic holders, French flags, etc., on your ARRI camera rig by using the ARRI CCH-2 Center Camera Handle. This sturdy carrying handle screws onto a UAP-2 adapter plate (available separately), and features multiple 3/8" -16 and 1/4" -20 threaded holes for attaching accessories. Designed for use with ALEXA M, ALEXA Mini, and AMIRA cameras, it will also work with many ARRI accessory-equipped third-party cameras.

Features

Sturdy carrying handle attaches to a UAP-2 adapter plate (available separately) to provide accessory mounts

Adds multiple 3/8" -16 threaded mounting points to an AMIRA and ALEXA M/Mini Camera, or third-party cameras using ARRI support systems

ARRI Single Support Rod (3.5" , 19mm)

The lightweight ARRI Single Support Rod (3.5" , 19mm) is designed to support a lens motor driving an Ultra or Master Prime lens mounted in the ARRI SAM-3 Stabilizer Adapter Mount. This stainless steel rod may also be used for any rig where space constrictions dictate the use of a shorter 19mm rod.

ARRI Single Support Rod (5.9" , 19mm)

The lightweight ARRI Single Support Rod (5.9" , 19mm) is designed to support a lens motor driving an Ultra or Master Prime lens mounted in the ARRI SAM-3 Stabilizer Adapter Mount. This stainless steel rod may also be used for any rig where space constrictions dictate the use of a shorter 19mm rod.

ARRI ALEXA Mini/AMIRA Straight Power Cable KC-50 (6.6 )

Use the ALEXA Mini/AMIRA Straight Power Cable from ARRI to connect the camera to a battery with a 3-pin XLR connector.

ARRI Battery Adapter Plate BAP-2A

The Battery Adapter Plate BAP-2A from ARRI enables you to support a battery plate on the side of a CBP-1 or CBP-2 Compact Bridge Plate. This versatile adapter features multiple pro-battery plate interfaces. Compatible components include the separately available ARRI Power Splitting Box and the Bebob AMICRO and VMICRO battery plates.

Compatibility

ARRI CBP-1 and CBP-2 Compact Bridge Plates

ARRI Power Splitting Box

Bebob AMICRO and VMICRO battery plates

Most pro battery plates