ikan STRATUS Complete Shoulder Rig Kit for Canon C200 & C200B

Using the Manfrotto 501 system, the STRATUS Complete Shoulder Rig Kit from ikan allows you to quickly move the cage component between the rig and an optional tripod. The shoulder pad features 501 plate support, and a 501 baseplate mounts on top and holds the included 16" carbon fiber rods.

The side plates of the cage secure to the baseplate, and the top plate supports the included top handle or the standard C200 handle via dedicated grooves. With the cage removed, this rig can alternatively be used as a support for virtually all other cameras.

Extension brackets with rubber handgrips attach to the rosettes on the shoulder pad. One of the handgrips can be switched out for the Canon grip, which can be connected via an included grip relocator coiled cable.

An EVF bracket can be secured to one of two included 15mm rod adaptersone that can attach to the front of the top handle, or one that screws into the top plate (or anywhere else) via a 1/4" -20 screw. The EVF bracket supports side-mounted, ARRI rosette EVFs or the included monitor mount plate in place of an EVF to support up to 7" monitors. The rig is complete with counterweights that attach to the back via an LWS rod mount.

Shoulder Pad

Manfrotto 501 plate support

Ergonomic gel polymer padding

ARRI rosettes for handgrips

Built-in adapter on the front for attaching an optional VCT, dovetail, or other plate (features eleven 1/4" -20 and three 3/8" -16 threads)

Seven 1/4" -20 threads on the rear for additional expansion

Cage

Top plate supports the included top handle or the standard C200 handle with LCD grip via dedicated grooves

Top plate provides 1/4" -20 and 3/8" -16 threads and six ARRI locating pin slots supporting compatible magic arms

Side plates with 1/4" -20 threads, ARRI 3/8" -16 anti-twist threads, and a rosette mount for handgrips or the Canon grip when the cage is used off the shoulder rig

The side plates secure to the sides of the baseplate

Top Handle

Mounts on the top plate via a removable NATO bracket

Shoe mount

1/4" -20 and 3/8" -16 threads, including one each with anti-twist pins

Built-in 15mm rod slot inside where an optional rod can be secured by an optional 1/4" -20 screw

Handgrips

Rosette extension brackets attach to the rosettes on the shoulder pad and adjust from 5.3 to 8.5" in length

Rosette rubber handgrips attach to the brackets, and one can be switched out for the Canon grip, with the included grip relocator coiled cable (16.5 to 40" ) with a 3.5mm connection used to connect the grip

EVF Bracket

Attaches to one of two 15mm rod adapterson the top handle or top plate

Features a sideways 15mm rod as part of its 8.5" NATO rail, rosette-adjustable design

Included compact monitor mount plate can be attached to the EVF bracket s rosette in place of an EVF to support up to 7" monitors

EAN: 847983031313