LanParte Pro Shoulder Kit for Blackmagic URSA Mini

The Lanparte Pro Shoulder Kit includes the URSA Mini Top Handle, URSA Mini Extension Arm, ARRI Rosette Handgrip, Double ARRI Rosette Lock Threaded Hole with Double Rod Clamp, V-Mount Shoulder Pad, two 9.8" Aluminum 15mm Rods, Follow Focus V2, Follow Focus Gear Ring V2, Follow Focus Arm, ABS Matte Box, Magic-Arm V1, V-Mount Battery Back Plate, and ABS Safety Case.

The Top Handle with cheese plate for your URSA Mini offers multiple 1/4" -20 and 3/8" -16 holes, maximizing your accessory mounting choices. The Extension Arm is specifically designed to work with the original handgrip of the URSA Mini and a baseplate or shoulder rig (available separately). Offering ARRI standard rosette adapters on both sides, the 15mm rod compatible Dual Rod Clamp allows you to attach and adjust a rosette-mount handgrip on either side of your shoulder rig.

Build up your DSLR, mirrorless, or camcorder to fit on your shoulder with the V-Mount Shoulder Support V2. An arched pad makes up most of the base of the Shoulder Mount, providing a comfortable platform for the rig to rest on your shoulder. Mount accessories to your rig with the pair of 9.8" 15mm Aluminum Rods. The Follow Focus V2 clamps onto the 15mm LWS rods, allowing you to smoothly and accurately pull focus with cinema and DSLR lenses equipped with gear rings. The Gear Ring with Pin-Lock Tightening Mechanism for Follow Focus is a rubber gear with a standard pitch of 0.8 and a maximum diameter of 4.1" . The Extension Arm for Follow Focus increases the height of your Follow Focus FF-01 or FF-02 (sold separately) to make it fit taller cameras, such as the Canon C300 and the RED EPIC.

The MB-01 4 x 4 Rod-Mounted DSLR Swing-Away Matte Box fits lenses with a maximum front outer diameter of 100mm. It features ABS plastic and aluminum construction that makes it lightweight. Mount a 1/4" -20 accessory to your 15mm LWS rig with the Magic Arm and gain the flexibility to fit it in nearly any orientation you require. The durable and watertight ABS Protection Case features a custom pre-cut foam interior designed to hold and protect the key components of your Lanparte camera rig kit.

LanParte Top Handle/Cheese Plate for URSA Mini

Use this Top Handle/Cheese Plate combination from LanParte with your URSA Mini. Both the handle and its cheese plate base offer multiple 1/4" -20 and 3/8" -16 holes, maximizing your accessory-mounting choices. The cheese plate mounts to the top of the camera, and the top handle attaches to the cheese plate via a locking NATO rail connector. The handle is T-shaped, offering a more secure grip design than the original URSA Mini handle. Other features include hollow aluminum construction to minimize weight, and a front cold shoe mount.

Multiple 1/4" -20 and 3/8" -16 mounts for easy accessory mounting

Mounting holes are on both the handle and its cheese plate base

A cold shoe mount is placed at the front of the handle

The top handle attaches to the cheese plate easily via a NATO rail connector with lever

Hollow aluminum construction for reduced weight

EAN: 840534107130

LanParte Extension Arm for the URSA Mini

This LanParte Extension Arm is specifically designed to work with the original handgrip of the URSA Mini and a baseplate or shoulder rig (available separately). It allows you to position the handgrip at an extended distance from the camera, increasing the overall stability of the rig and making operation more comfortable. The extension arm adds almost 1 of length to the handgrip, and the included Arri-style rosette extension can be used to add just over 2" distance from the side of the camera rig. The rosette connection allows the arm to be positioned at whatever angle you prefer. This arm features a handily incorporated LANC cable, allowing you to maintain use of all the handgrip s controls.

Designed for the URSA Mini

Fully adjustable 2" Arri-style rosette extension included

Built-in 3-pin LANC cable maintains all handgrip controls

Adds approximately 1 to the handgrip length, and 2" to the baseplate width

Aluminum construction

EAN: 840534107123

LanParte Dual Rod Clamp with Rosettes

Offering ARRI-standard rosette adapters on both sides, this 15mm rod compatible Dual Rod Clamp, from Lamparte, allows you to attach and adjust rosette-mount handgrips on your shoulder rig. The rosette adapters are 60-tooth ARRI-standard compatible and made of steel.

EAN: 840534113292

LanParte V-Mount Shoulder Support V2

Build up your DSLR, mirrorless, or camcorder to fit on your shoulder with the Lanparte V-Mount Shoulder Support V2. An arched pad makes up most of the base of the Shoulder Mount, providing a comfortable platform for the rig to rest on your shoulder. The front of the rig has a v-wedge for interfacing with a standard VCT-14 ENG quick release tripod plate. On top of the shoulder mount, a sliding baseplate lets you properly balance the camera after attaching it to the plate. As not all cameras have the same optical axis, the 15mm rod blocks are height-adjustable to allow your 15mm LWS accessories to all fit properly.

V-Mount lock on bottom of shoulder support

Quick release system with safety trigger

Mountable on VCT-14 via the tail lock

Adjustable rod height

15mm Rod connectors

Ergonomic shoulder pad

Spirit level

CNC machined

Hollow design, lightweight at 3 lb

LanParte 15mm Aluminum Rod (Pair, 9.8" )

Mount accessories to your rig with this pair of 9.8" 15mm Aluminum Rods from Lanparte. This rod set is extendable via integrated 12mm threading on the rod ends, allowing for separately available extension screws to be used to mount more threaded rods.

Extendable with optional LPT-V2-059 Screw

Bevel-edged

Anodic oxidation surface treatment

Glossy finish

EAN: 840534113148

LanParte Follow Focus V2 with Hard Stops for 15mm Rods

The Lanparte Follow Focus V2 clamps onto 15mm LWS rods, allowing you to smoothly and accurately pull focus with cinema and DSLR lenses equipped with gear rings. Its quick release design that lets you easily snap it onto the rods without having to remove other rod-mounted accessories, such as a matte box. Integrated into the follow focus are A and B hard stops, letting you set start/end points on DSLR lenses that have continuously rotating focus rings. Additionally, the follow focus features an ARRI standard accessory port for using optional focus whips and speed cranks. A standard 0.8 pitch gear comes includes, which can be positioned on either side of the gearbox, as well as a removable magnetic marking disc. Also included is an adjustable gear ring for use with DSLR lenses that lack integrated focus gear rings.

Key Features

• Clamps onto 15mm LWS rods
• Integrated A/B hard stops
• Copper gear and precision bearing
• Standard 0.8 pitch drive gear included
• Drive gear can be flipped to either side of gearbox
• Sliding dovetail design for adjusting to different sized lenses
• Removable magnetic marking disc<