Movcam FS7 15mm Standard Kit (Gold Mount)

Movcam FS7 Riser Plate

Attaching the Movcam FS7 Riser Plate to the bottom of the Sony FS7 camera increases the mounting surface area and keeps it flat. The top surface is specially shaped to fit exactly with the FS7 s contours. With the expanded surface area, a shoulder pad or tripod plate can be placed anywhere along the bottom of the camera for optimal balance with different lenses or rig components. The base of the plate is also Arca-Swiss compatible for securing to Arca-Swiss standard support equipment. Aside from camera support, the front of the plate can house a lens/adapter support to reduce stress on the camera s lens mount.

Movcam Multi-BP Baseplate for FS7 Camera Rig

The Multi-BP for FS7 Camera Rig from Movcam is a multi-purpose base plate for the FS7 camera. On one end, there is 15mm rod clamp with locking lever, and on the other end, there are standard rosette on each side. The plate includes a shoulder pad.

Movcam Side Bracket for Sony FS7 Rig

The Side Bracket from Movcam is a side bar for their Sony FS7 camera rig. It features a standard rosette at the bottom.

Movcam Top Clamp for Sony FS7 Camera Rig

The Top Clamp for FS7 Camera Rig from Movcam is a 15mm rod clamp used on top of the Sony FS7 camera rig.

Movcam Rod Clamp for 15mm Systems

The Rod Clamp from Movcam is a rod clamp for 15mm systems. It can take three rods in total: two in parallel and one in vertical.

Movcam Power Distribution Box for Sony FS7/FS7 II (Gold Mount)

This Power Distribution Box for Sony FS7/FS7 II from Movcm enables you to use a pro-style Gold mount battery to power your Sony FS7 or FS7 II camera, plus accessories like onboard lights, monitors, microphones, or transmitters using its multiple power outputs. This plate features one 14.8V D-Tap output, one 4-pin 8V LEMO output, one 4-pin XLR DC input, and two 3-pin LEMO 12V outputs. The top of this box features multiple 1/4 -20 and 3/8 -16 threads for mounting accessories.

Compatibility

Gold Mount Battery Plate

Multiple Accessory Ports

Incorporates one 4-pin 8V LEMO output, one USB Type-A output, two D-Tap outputs, and two 3-pin 12V LEMO for powering a variety of accessories

Movcam H Rosette Spacer

The Movcam H Rosette Spacer mounts between any two industry-standard rosettes to provide spacing between them.

Movcam Universal LWS Dovetail Plate

The Movcam Universal LWS Dovetail Plate is a baseplate compatible with Arri BP8 and Arri BP9 Bridgeplates.

Movcam Mini Follow Focus MF-2

The Movcam Mini Follow Focus MF-2 is a single-sided follow focus with a sliding base that accommodates different lens constructions.

The MF-2 quickly and securely mounts 15mm rods via a tightening mechanism controlled by a silver underside knob. A standard flexi-ring comes included for lenses that don t have ring teeth.

The gear drive is .8, and focus is achieved by constant damping that ensures precise focus. A focus scale helps measure focusing distances.

Movcam Universal Lens Support

Compatible with dual 15mm LWS rods, the Movcam Universal Lens Support is height adjustable to provide 0.75 support at the lowest position from the rod center, and 1.25 at the highest position. It secures onto a pair of rods from one side and offers a textured rubber lens support surface. You don t have to worry about it unscrewing because the lens will prevent it from turning sideways.

Movcam Mattebox MM1

The Movcam Mattebox MM1 features a 144mm rear opening and is compatible with lenses up to 14mm (35mm academy).

It is equipped with a 16:9 carbon fiber housing, a French flag and side wings for light control, one fixed / one rotating 4 x 5.65 filter holder, a 15mm mini swing-away bracket, and a 144:114 rubber bellows that can optionally be stepped down.

The swing-away bracket provides industry-standard 15mm rod support.

Movcam 15mm Aluminum Rod - 8 Long

The 15mm Aluminum Rod - 8 (203.2mm) Long from Movcam is a single rod made of aluminum and is 8 (203.2mm) in length.