Use the aluminum ARRI Standard Studio Bridgeplate and 12" Dovetail Plate with two tapered, 12" 19mm rods to easily mount and unmount your camera and accessories. The studio-offset rods are spaced 104mm apart. One 1/4" -20 and one 3/8" -16 screw allow mounting a variety of cameras, and the plate locks and slides up and down the rods with the use of a locking lever.
The studio bridgeplate is attached by 1/4" -20 and 3/8" -16 screws to an aluminum, Teflon-coated ARRI standard dovetail plate. The 12" plate has a tapered ARRI dovetail that allows you to adjust your bridgeplate by easily sliding back and forth. A stopper screw on one end and a safety latch on the other prevent the bridgeplate from accidentally sliding off the plate. There are twelve 1/4" -20 and five 3/8" -16 threads down the center of the plate for mounting.
A flat screwdriver is provided to tighten the mounting screws, and it can be attached to the bridgeplate with a magnet.
EAN: 629266008348
SHAPE Studio Bridgeplate Specs
| Support Type | Baseplate |
| Grip Type | None |
| Camera Compatibility | Universal |
In the Box
- SHAPE ARRI Standard Studio Bridgeplate and 12" Dovetail Plate with 19mm Rods
- 1/4"-20 Captive Screw
- 3/8"-16 Captive Screw
- 2 x 19mm Rod
- Flat Screwdriver
No posts found
