SHAPE Baseplate and Articulating Handle for Sony FX6

Add a shoulder mount to your Sony FX6 camera with this Baseplate with Articulating Handle from SHAPE. The kit includes a lightweight aluminum VCT baseplate and an articulating push-button handle with a rubber handgrip.

The VCT baseplate incorporates two ARRI-compatible rosettes for attaching optional handgrips and accessories, features 1/4" -20 and 3/8" -16 camera mounting screws, and is VCT-14 quick release compatible. Its sliding shoulder pad plate allows you to optimally position your camera on your shoulder or rig. The articulating handle features a comfortable rubber handgrip and mounts onto one of the rosettes on the baseplate, and it can be adjusted with the press of a button. The front and rear 15mm LWS rod clamps enable you to mount the included 8 and 4" pairs of rods to support accessories in front and the rear.

SHAPE REVOLT VCT Universal Baseplate

Featuring a sliding camera plate, SHAPE's REVOLT VCT Universal Baseplate can accommodate rigs of varying sizes. Simply attach your camera via 1/4" -20 or 3/8" -16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set.

The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center.

Height-adjustable rod clamp for aligning the 15mm rods at the proper LWS height in relation to the optical axis.

Front and rear rod clamps allow you to extend your rig forwards and backwards.

Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand.

Safety pins and spring-loaded levers prevent the top plate from sliding unintentionally.

Soft and ergonomic shoulder pad.

EAN: 629266006672

SHAPE 15mm Aluminum Rods (Pair, 8" )

This pair of Shape 15mm Aluminum Rods (8" ) connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

EAN: 629266001691

SHAPE 15mm Aluminum Rods (Pair, 4" )

This pair of Shape 15mm Aluminum Rods (4" ) connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

EAN: 629266001677

SHAPE Single Quick Handle with Double ARRI Rosette

The Single Quick Handle with Double ARRI Rosette from SHAPE features SHAPE's quick-lock button technology. The handle can rotate on a 360° axis. The handle and arm can be rotated by pushing the red button. Once the button is released, the handle is secured firmly in place.

The Quick Handle Rosette features a stainless steel locking mechanism for more durability. Providing a solid grip, the handle fits perfectly on the SHAPE baseplate series, including the BP0001 and BP0007 Quick-Release Baseplates, and the Dovetail System thanks to the precision of the ARRI rosette sockets. The handle is removable with one knob screw. It is constructed from CNC machined, high-quality aircraft grade aluminum parts, which are hard anodized for a resistant finish and assembled with stainless steel screws to prevent rusting.

SHAPE Quick Handle, push-button technology

Single red knob for fast and easy adjustment

Individual rotation on a 360° axis

Great grip, stability, and precision

CNC machined parts

Anodized aluminum for resistance

Stainless steel locking mechanism for durability

EAN: 629266000892