SHAPE Baseplate with Cage, Left-Side Handle & Follow Focus Pro for Canon C500 Mark II & C300 Mark III

SHAPE Compact Revolt Shoulder Baseplate

EAN: 629266009338

The SHAPE Compact Revolt Shoulder Baseplate is a lightweight baseplate suitable for use by neophytes and professionals alike. Made from CNC-machined aluminum, the baseplate is made to withstand the rigors of the production day. The shoulder pad allows it to sit comfortably on your shoulder. The top of the baseplate features two rubber strips to protect your camera. It incorporates two ARRI-compatible rosettes for attaching handle accessories. The top of the baseplate features a 3.5 -long slot that enables adjusting your camera s position for balance adjustments.

Front and rear 15mm LWS rod clamps enable you to mount the included 8 and 4 pairs of rods to support you lens accessories in front, and power/monitoring accessories in the rear. An included 3mm Allen Key allows you to adjust the rod clamps, and the rear rod clamp is removable and attaches to the Revolt Shoulder Baseplate by two M4 screws. On the bottom of the baseplate is a V-lock plate that is compatible with most VCT baseplates. The V-lock plate has both a 1/4 -20 and 3/8 -16 threaded mounting hole.

The ARRI-compatible rosettes feature M6 threading

Front and rear 15mm rod clamps have spring-loaded locking levers

Slip-free gel shoulder pad

The shoulder plate is equipped with 1/4-20 and 3/8-16 threaded holes, allowing extra screws to be stored, and a magnet is provided at the back to attach the included Allen key

Designed with a standard V-lock plate that is compatible with most VCT tripod plates

Includes both 4 and 8 15mm support rod pairs

Camera platform tilts on hinges to allow access to the camera tie-down screws, and it is held in place by powerful magnets that hold the plate closed

SHAPE 15mm Aluminum Rods (Pair, 4 )

EAN: 629266001677

This pair of Shape 15mm Aluminum Rods (4 ) connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

SHAPE Follow Focus Pro

EAN: 629266002360

The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

• Snap-on 15mm rod attachment
• Adjustable arm
• Two 0.8 pitch aluminum gears included: 28 teeth and 43 teeth
• Interchangeable gear position
• Adjustable hard stops
• Removable marking disc
• Industry standard accessory port
• CNC machined aluminum parts