SHAPE COMPOSITE Camera Shoulder Rig for Sony F55/F5

SHAPE Pair of 15mm Female - Female Rod (8 )

EAN: 629266001660

The Shape Pair of 15mm Female - Female Rod (8 ) are anodized aluminum rods with 1/2 -13 threaded female extremities.

The rods are 8 (203mm) long and have a diameter of 0.59 (15mm). You can use the 15mm Female - Female Rods (8 ) with 15mm Male - Female Rod (4 / 101.6mm), 15mm Female - Female Rod (6 / 152.4mm), Rod Black, and the Sliding Rod Block.

Anodized aluminum rods with 1/2 -13 threaded female extremities

Rod Length - 8 (203mm)

Rod Diameter - 0.59 (15mm)

Compatible with 15mm Male - Female Rod (4 / 101.6mm), 15mm Female - Female Rod (6 / 152.4mm), Rod Black, and the Sliding Rod Block

SHAPE Quick Handle + Rod Block

EAN: 629266000793

The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360° . You can attach the handle to the camera platform using a simple screw knob. Asimple push button located at the articulation allows easy attachment and removal.

Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

Quick Handle

Provides professional video stabilization with 2 handles

Each handle offers 360° individual rotation

Rod Block

Composed of anodized aluminum

Offers composite camera support for all 15mm rods

Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob

With 2 screw-threaded holes, the Rod Block provides for attachment of components

SHAPE Paparazzi with Bloc

EAN: 629266001028

The SHAPE Paparazzi with Bloc is an ergonomic-designed Paparazzi Handle screwed tight to a Rod Bloc by two 1/4 screws.

The Handle features a total of 20 screw-holes for attaching accessories, and the Bloc mounts 15mm rods and keeps the Handle parallel with a camera. You can slide the Bloc up and down the rods and tighten it into position by a red lever on the side. Both the Handle and Bloc are totally solid -- not at all hollow -- and are both water cut / laser cut, as opposed to being molded.

The 20 screw-holes are a mix of 1/4 , 3/8 and 1/2 sizes and all run completely through from end to end. They are positioned vertically or horizontally along the Handle. The 1/4 and 3/8 holes can take on most any 1/4 and 3/8 accessories like lights, monitors, mics, grips, remote controls, recorders, articulating arms, wireless audio receivers, camera plates, and more. And into the 1/2 holes you can screw in male-threaded SHAPE rods.

The diverse set of screw-holes lets you get very creative in dressing up your rig. And the ability to screw in rods lets you just as creatively extend your rig.

Dress Up Your Rig

• Mounts 15mm rods and keeps an ergonomic Handle parallel with the camera
• Features mix of twenty 1/4 , 3/8 and 1/2 screw-holes for attaching accessories
• The 1/2 holes let you screw in male-threaded rods and thus further extend your rig
• Takes on lights, monitors, mics, grips, remotes, recorders, arms, receivers, rods, etc.
• Fully solid and water / laser cut, and the holes run completely through from end to end

SHAPE Mini Composite Shoulder Pad

EAN: 629266000830

The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob s screw is a 1/4 -20 screw. If you remove the Screw Knob, you ll have yourself a 1/4 -20 screw-hole to add various 1/4 -20-mount accessories into.

SHAPE Back Pad

EAN: 629266001202

The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad s position can be adjusted to the user s preference “ up to 2 vertically and 360° horizontally.

Compatible Support Series

• Composite
• Cameleon
• Sumo
• Spider