SHAPE Paparazzi Handle for Canon C100/C300/C500

SHAPE Baseplate with 15mm Rods for Canon EOS C500/C300/C100

EAN: 629266001776

Mount your Canon EOS C500, C300, or C100 camera on a shoulder rig, tripod, or other rig and add accessories with this Baseplate from SHAPE. The system features a baseplate with 15mm LWS rod clamps, a camera plate, and two aluminum 15mm rods that measure 12 in length.

The baseplate features M4, 3/8 -16, and 1/4 -20 screws to securely mount your camera. The baseplate also features 1/4 -20 and 3/8 -16 tripod mounting threads on the bottom. The standard 15mm LWS rod ports secure the included 15mm rods with locking levers, allowing you to add accessories such as a follow focus, matte box, and more.

The baseplate is not compatible with the Canon EOS C200 camera.

Attaches underneath the camera via M4, 3/8 -16, and 1/4 -20 screws

Mount on a tripod or rig with 3/8 -16 and 1/4 -20 threads

The 15mm rod clamps on the baseplate secure two 12 long 15mm aluminum rods

The 15mm LWS design is designed to respect the camera s optical center

Four rubber pads at the top of the baseplate protect and secure your camera

SHAPE Paparazzi with Bloc

EAN: 629266001028

The SHAPE Paparazzi with Bloc is an ergonomic-designed Paparazzi Handle screwed tight to a Rod Bloc by two 1/4 screws.

The Handle features a total of 20 screw-holes for attaching accessories, and the Bloc mounts 15mm rods and keeps the Handle parallel with a camera. You can slide the Bloc up and down the rods and tighten it into position by a red lever on the side. Both the Handle and Bloc are totally solid -- not at all hollow -- and are both water cut / laser cut, as opposed to being molded.

The 20 screw-holes are a mix of 1/4 , 3/8 and 1/2 sizes and all run completely through from end to end. They are positioned vertically or horizontally along the Handle. The 1/4 and 3/8 holes can take on most any 1/4 and 3/8 accessories like lights, monitors, mics, grips, remote controls, recorders, articulating arms, wireless audio receivers, camera plates, and more. And into the 1/2 holes you can screw in male-threaded SHAPE rods.

The diverse set of screw-holes lets you get very creative in dressing up your rig. And the ability to screw in rods lets you just as creatively extend your rig.

Dress Up Your Rig

• Mounts 15mm rods and keeps an ergonomic Handle parallel with the camera
• Features mix of twenty 1/4 , 3/8 and 1/2 screw-holes for attaching accessories
• The 1/2 holes let you screw in male-threaded rods and thus further extend your rig
• Takes on lights, monitors, mics, grips, remotes, recorders, arms, receivers, rods, etc.
• Fully solid and water / laser cut, and the holes run completely through from end to end