SHAPE Shoulder Mount for Sony PXW-FX9 Camera

SHAPE 15mm Lightweight Baseplate for Sony PXW-FX9

EAN: 629266009895

This 15mm Lightweight Baseplate from SHAPE is designed to support the Sony PXW-FX9 camera. The aluminum baseplate features 1/4 -20 and 3/8 -16 screws to secure your camera to the plate, and there are mounting holes underneath to mount the baseplate on a plate or tripod.

The baseplate includes a pair of 12 15mm rods that insert through the length of the baseplate and are secured with a locking thumbscrew. There are rubber pads on the top of the plate to protect your camera from scratches and prevent twisting.

Attaches underneath the camera via 3/8 -16 and 1/4 -20 screws

Locking thumbscrews to reposition the 15mm rods

Four rubber pads at the top of the base protect and securely hold your FX9 camera

Multiple threaded holes to mount baseplate on a tripod, shoulder rig, gimbal, or drone

SHAPE Quick Handle + Rod Block

EAN: 629266000793

The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360° . You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal.

Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

Quick Handle

Provides professional video stabilization with 2 handles

Each handle offers 360° individual rotation

Rod Block

Composed of anodized aluminum

Offers composite camera support for all 15mm rods

Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob

With 2 screw-threaded holes, the Rod Block provides for attachment of components

SHAPE Mini Composite Shoulder Pad

EAN: 629266000830

The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob s screw is a 1/4 -20 screw. If you remove the Screw Knob, you ll have yourself a 1/4 -20 screw-hole to add various 1/4 -20-mount accessories into.

SHAPE Back Pad

EAN: 629266001202

The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad s position can be adjusted to the user s preference - up to 2 vertically and 360° horizontally.

Compatible Support Series

• Composite
• Cameleon
• Sumo
• Spider

SHAPE 15mm Rods (18 , Pair)

EAN: 629266002223

These Shape s 15mm Rods are a pair of 18 long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18 long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps.

Pair of aluminum support rods for 15mm rod clamps.

18 long rods with chamfered ends that guide the rod into an available rod clamp, even if the rod isn t perfectly aligned or is at a slight angle to the rod clamp.