SHAPE Shoulder Rig Bundle for ENG-Style Camcorder

SHAPE Paparazzi with Bloc

EAN: 629266001028

The SHAPE Paparazzi with Bloc is an ergonomic-designed Paparazzi Handle screwed tight to a Rod Bloc by two 1/4 screws.

The Handle features a total of 20 screw-holes for attaching accessories, and the Bloc mounts 15mm rods and keeps the Handle parallel with a camera. You can slide the Bloc up and down the rods and tighten it into position by a red lever on the side. Both the Handle and Bloc are totally solid -- not at all hollow -- and are both water cut / laser cut, as opposed to being molded.

The 20 screw-holes are a mix of 1/4 , 3/8 and 1/2 sizes and all run completely through from end to end. They are positioned vertically or horizontally along the Handle. The 1/4 and 3/8 holes can take on most any 1/4 and 3/8 accessories like lights, monitors, mics, grips, remote controls, recorders, articulating arms, wireless audio receivers, camera plates, and more. And into the 1/2 holes you can screw in male-threaded SHAPE rods.

The diverse set of screw-holes lets you get very creative in dressing up your rig. And the ability to screw in rods lets you just as creatively extend your rig.

Dress Up Your Rig

• Mounts 15mm rods and keeps an ergonomic Handle parallel with the camera
• Features mix of twenty 1/4 , 3/8 and 1/2 screw-holes for attaching accessories
• The 1/2 holes let you screw in male-threaded rods and thus further extend your rig
• Takes on lights, monitors, mics, grips, remotes, recorders, arms, receivers, rods, etc.
• Fully solid and water / laser cut, and the holes run completely through from end to end

SHAPE CP33 Multi-Purpose Mounting Cheese Plate

EAN: 629266000120

SHAPE s CP33 Multi-Purpose Mounting Cheese Plate will let you add various accessories and devices to your camera rig. Just attach it to any two 15mm rods on your rig, and you ll have a total of thirty-three 1/4- 20, 3/8 -16, and 10/32 threaded holes to work with.

You can attach accessories to both the front, back and sides, and in some applications at the same time -- for example, you can have a battery plate on the front side and an AJA Ki Pro recorder on the back. The holes on the side are the 10/32 holes. Four are available on each side for audio receiver brackets. Another great accessory you can attach is an articulating arm. You can actually attach a bunch of articulating arms, each pointing in a different direction.

The plate is 1/4 -thick and is precision-machined into one whole, aluminum piece. It comes with sets of screws for attaching the Ki Pro, IDX battery plates and Anton Bauer battery plates.