Tilta Basic Camera Cage Kit for BMCC 6K (Black)

Tilta TA-T64-B Overview

The black Basic Camera Cage Kit for BMCC 6K from Tilta features a protective, modular full cage with secure three-point camera mounting, a bracket for the Blackmagic battery grip, and a 15mm LWS rod bracket. This basic kit fleshes out the cage with a Xeno padded top handle, a holder for a Samsung T5 SSD, and a 90° HDMI adapter.

Tilta Full Camera Cage for Blackmagic Design Cinema Camera 6K (Black)

The black Full Camera Cage for Blackmagic Design Cinema Camera 6K from Tilta is a modular, formfitting cage that both protects and adds accessory mounts to your camera. It features a flexible design and a bracket that accommodates an original battery grip in a half-cage form. Accessory mounts include a NATO rail, a rosette, two cold shoe mounts, and multiple anti-twist 1/4" -20 and 3/8" -16 threaded holes for accessories. The bottom of the cage incorporates an Arca-type plate and a magnetic screwdriver multi-tool.

Compatibility

This dedicated cage fits the Blackmagic Design Cinema Camera 6K and features a top plate that aligns exactly with the 1/4" -20 thread on top of the camera.

Works with Battery Grip

Use the included bracket to create a half cage that accommodates the camera s original battery grip.

Durable Construction

Formfitting aluminum alloy cage.

Multiple Accessory Mounts

Accessory mounting options include an ARRI-style rosette, a NATO rail, two cold shoe mounts, and multiple anti-twist 1/4" -20 and 3/8" -16 threads.

Anti-Twist Design

An anti-twist design keeps your camera secure in the cage.

EAN: 810076279503

Tilta Xeno Top Handle with 1/4" -20 Locating Screw (Black)

Integrate this black Tilta Xeno Top Handle into your camera cage configuration for improved low-angle shooting. The top handle secures to your cage via a built-in 1/4" -20 screw with locating pins. Multiple 1/4" -20 and 3/8" -16 threads throughout the handle allow you to attach articulating arms, cable clamps, or other accessories. A single cold shoe slot accommodates a shotgun microphone or wireless transmitter. The handle s silicone grip makes for an ergonomic and anti-slip handgrip.

EAN: 810076277943

Tilta Samsung T5 SSD Holder for BMPCC 4K Cages (Black)

Add a solid-state drive to your Blackmagic Design Pocket Cine Camera 4K with this black Samsung T5 SSD Holder from Tilta. The aluminum and stainless steel holder is designed to snugly fit the Samsung T5 SSD, which is secured with a thumbscrew. The holder attaches to the cage with the included screws, and there are screws included to attach the separately available partial sun hood to protect your LCD monitor from sunlight and glare.

Compatibility

Samsung T5 SSD
Tilta Camera Cage for Blackmagic Pocket Camera 4K

Tilta 15mm Rod Holder for Blackmagic Design Pocket Cinema Camera 6K Pro & 6K G2 (Black)

Add rods to your Blackmagic Pocket Cinema Camera 6K Pro and 6K G2 cameras when using the Tilta Half Cage with the extended bottom plate for the Blackmagic Design battery grip, with this black 15mm Rod Holder from Tilta. This rod holder enables you to use cinema-style accessories with your camera, battery grip, half cage setup (cage, extended bottom plate, and battery grip not included), which otherwise would not be possible, as the battery grip would raise the camera too far above the correct lens center-to-rod distance when using standard baseplate rod clamps.

This holder/clamp supports the 15mm LWS standard for rod supports, and it mounts on your cage via the extended bottom plate. The mounting screw attaches the rod holder to the cage, and the two locking pins on the holder interface with the divots on the cage to secure the holder to prevent shifting during use. The rod clamp locking lever is set underneath so that it s out of the way.

EAN: 810076273051

Tilta HDMI Right-Angle Adapter for BMPCC 4K Camera Cage

Make it easier to plug in your camera s HDMI cable when using Tilta s Blackmagic Design Pocket Cinema Camera 4K cage with this HDMI Right-Angle Adapter. The adapter is designed at a 90° angle and attaches to the corner of the cage with a thumbscrew. This puts the male HDMI type A connector in place to plug into your camera, and the female HDMI type A end remains unimpeded.

EAN: 709016727665