Tilta Tiltaing Z CAM E2 Kit C (Black)

Use the Tiltaing Z CAM E2 Kit C from Tilta to protect, provide fingertip focus control and extended battery power, and add accessory mounts to your Z CAM E2, E2C, or E2G camera. This black kit includes a full camera cage, the side focus handle type II, a 15mm LWS baseplate with rod mount, a quick release top handle, a Samsung T5 SSD holder, both Arca-Swiss and Manfrotto-style quick release plates, and several cables.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

Tilta Full Camera Cage for Z CAM E2 & E2G (Black)

The black Full Camera Cage for Z CAM E2 & E2G from Tilta clads your E2 camera in protective armor while providing a variety of accessory mounting options. This dedicated cage also provides two ARRI-style rosettes for attaching handgrips or other components. The cage is compatible with Z CAM E2 and E2G camera bodies.

Constructed from an aluminum alloy and stainless steel, the Tilta Z CAM E2 cage incorporates multiple 1/4" -20, 3/8" -16, and ARRI-style anti-twist threads and one cold shoe mount. Access to the camera s controls and ports is maintained when the cage is mounted on your camera, and the base incorporates several tripod/gimbal mounting holes.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

Compatibility

• Z CAM E
• Z CAM E2G

Tilta HDMI Clamp for Tiltaing Z CAM Cage (Black)

This black HDMI Clamp for Z CAM from Tilta secures against both accidental HDMI cable disconnection and port damage to your Z CAM E2 camera. Made from an aluminum alloy and stainless steel, this clamp includes mounting screws.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

Tilta Quick Release Top Handle (Black)

This Tilta Quick Release Top Handle, in black, is a durable, sculpted top handle that attaches securely to a cold shoe and provides accessory mounting points, in addition to a top handle grip for your camera. The quick release handle s features include two cold shoe mounts, one in the front with a spring-loaded safety latch and the second on the back. The handle also features a 15mm rod port and multiple 1/4" -20 and 3/8" -16 threads with and without anti-twist divots.

The aluminum and stainless steel handle attaches to your camera or cage using the included spring-loaded thumbscrew. The 15mm rod port features a locking lever to secure the rod in place. On the front face of the handle, there is a 1/4" -20 threaded mounting hole with anti-twist divots. Multiple 1/4" -20 and 3/8" -16 threaded mounting holes are machined into the top and sides of the handle.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

EAN: 631384551422

Tilta Samsung T5 SSD Holder for BMPCC 4K Cages (Black)

Add a solid-state drive to your Blackmagic Design Pocket Cine Camera 4K with this black Samsung T5 SSD Holder from Tilta. The aluminum and stainless steel holder is designed to snugly fit the Samsung T5 SSD, which is secured with a thumbscrew. The holder attaches to the cage with the included screws, and there are screws included to attach the separately available partial sun hood to protect your LCD monitor from sunlight and glare.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

Compatibility

Samsung T5 SSD
Tilta Camera Cage for Blackmagic Pocket Camera 4K

Tilta 90° USB Type-C Cable for Z CAM E2

The 8" 90° USB Type-C Cable for Z CAM E2 from Tilta is designed to specifically for the Tiltaing Z CAM E2 camera cage. Incorporating two right-angle USB Type-C connectors, this cable is designed to hang flat against the cage and features thumbscrew anchors on each end.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

EAN: 631384549702

Tilta Side Focus Handle Type II (F570, Tilta Gray)

In Tilta gray, this Tilta Side Focus Handle Type II supports a Sony F570 battery and lets you power and control the Nucleus Nano motor, sold separately. Alternatively, it can be used to power and control start/stop on compatible cameras. The handle includes the Tilta Type II mounting bracket, which features an ARRI rosette mount for attaching to cages such as the Tilta Z CAM cage.

The handle features two outputs. An 8V micro-USB output is used to connect to the Nucleus Nano motor, so you can control it via a finger wheel on the front of the handle. This same port is used to connect to a camera over a camera-specific micro-USB run/stop cable for Nucleus Nano. You can then use the run/stop button on the top of the handle. Next to the micro-USB port is a 12 VDC output that can be used to power the camera from your F570 battery. You can also choose not to make use of this port and still use the run/stop function. A battery and cables are all sold separately.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

EAN: 742377662282

Tilta Nucleus-Nano Run/Stop Cable for Sony FS7/FS5, URSA, EVA1, Z CAM Cameras

Use this Nucleus-Nano Run/Stop Cable from Tilta to connect your Sony FS7/FS5, Blackmagic Design URSA, Panasonic EVA1, or Z CAM camera to the control port of the Nucleus-Nano motor to control run/stop operation. The cable has a right-angle Nucleus-Nano control connector on one end and a right-angle LANC connector on the camera end.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

EAN: 709016727276

Tilta 12V Micro DC Male to Z CAM Power Cable

The 12V Micro DC Male to Z CAM Power Cable from Tilta enables you to power your Z CAM E2 camera using an external battery mounted on select Tiltaing side handles.

This cable has a micro DC male connector on one end and a 3-pin LEMO-type connector on the other.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

EAN: 631384549726

Tilta 15mm LWS Baseplate Type I (Black)

Featuring a black finish, the Tiltaing 15mm LWS Baseplate Type I is designed to work with the Tiltaing half and full cages for the BMPCC 4K/6K and Z Cam. The baseplate features integrated 15mm LWS rod clamps with spring-loaded locking levers that allow you to lock or loosen the clamps, even when you can t rotate the levers a full 360° . The bottom of the baseplate is compatible with standard Tilta dovetails.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

Works with Tiltaing full and half camera cages for BMPCC 4K/6K and Z Cam. It is also compatible with Tiltaing full camera cages for Sharp 8K, Panasonic GH5, Fuji XT3, Nikon Z7, and Sony a6/a7/a9 cameras.

The black finish makes it less visible in reflections.

EAN: 631384551453

Tilta Arca-Swiss Quick Release Plate for Tiltaing Camera Cages (Black)

Custom build your Tiltaing camera rig with this Arca-Swisscompatible Quick Release Plate from Tilta. Attach this black plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from an Arca Swiss support system.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

Compatibility

Most Tiltaing camera cages
Arca-Swiss support systems

Note:

Not compatible with the Tiltaing BMPCC 4K/6K cage

EAN: 614234707026

Tilta Manfrotto Quick Release Plate for Tiltaing Camera Cages (Black)

Custom build your Tiltaing camera rig with this Manfrotto-compatible Quick Release Plate from Tilta. Attach this black plate directly to the bottom of your compatible Tiltaing camera cage to quickly mount and detach the cage from a Manfrotto 577, 500, or 701 support system.

Note:

Not compatible with Z CAM E2-S6, E2-F6, or E2-F8 cameras.

Compatibility

Most Tiltaing camera cages
Manfrotto 577, 500, 701 support systems

Note:

Not compatible with the Til