Wooden Camera Elite Accessory System for Canon C400 (V-Mount)

Wooden Camera Elite Accessory System for Cano... Overview

Add all the accessories you need to your Canon EOS C400 cinema camera with this Elite Accessory System from Wooden Camera. The modular system includes an Arca-type baseplate with an Arca-type riser system, a top plate system with two left/right plates and a center plate, an Ultra Handle 5" standard kit, a bolt-on EVF adapter for the Ultra Handle, a NATO side rail, an 8" safety dovetail plate, two 12" long 15mm rods, and a pro V-mount battery slide.

The system provides tripod, shoulder pad, dovetail, 15mm rod, and bridge plate mounting options, lens support, a full top handle assembly with EVF mounting, multiple 1/4" -20 and 3/8" -16 accessory threads, and a NATO rail for mounting numerous accessory types. The battery slide mounts directly onto the back of the camera and can power the camera and accessories using a 4-pin XLR connector and three D-Tap outputs.

Wooden Camera Battery Slide for C300 Mark III and C500 Mark II (V-Mount)

Add a professional high-capacity battery to power your Canon C300 Mark III or C500 Mark II cinema camera with this V-mount Battery Slide from Wooden Camera. The battery slide mounts onto your camera using its captive screws and sits at an angle with a movable hinge to allow you to access the camera's BP-U battery.

The slide mounts a single V-mount battery and powers the camera using a 4-pin XLR cable, which also provides hot-swap capability with the camera's internal battery. There are three D-Tap outputs around the battery plate to power a variety of other accessories.

Compatibility

Canon C300 Mark III and C500 Mark II cinema cameras
V-mount battery

EAN: 606184859412

Wooden Camera Bolt-On Canon EVF Adapter for Ultra Handle

Mount your 15mm EVF adapter for the Canon C400 onto your Ultra Handle rig with this Bolt-On Canon EVF Adapter for Ultra Handle from Wooden Camera. The adapter mounts onto the Ultra Handle front riser or the 1" Ultra Handle extension, part of the Ultra Handle 5" kit. There are two 3/8" -16 threads to mount extensions, as well as the Canon EVF mount. It mounts using a 3/8" -16 screw.

EAN: 810112520187

Wooden Camera NATO Side Rail for Canon C400

The NATO Side Rail from Wooden Camera attaches to the separately available Canon C400 top plate and provides a NATO rail for accessories such as handgrips. It also features 1/4" -20 and 3/8" -16 mounting threads along the length of the rail for alternative mounting options. The rail can be mounted horizontally or vertically for different configurations, and it features anti-twist safety pins to keep accessories mounted securely.

EAN: 810112520170

Wooden Camera Safety Dovetail Plate (8" )

The 8" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.

EAN: 610079106338

Wooden Camera 15mm Support Rod (12" )

This is a single, 12" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.

EAN: 610079106123