Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Wooden Camera Solid Baseplate for Sony VENICE, F55 & F5
EAN: 606184855797
Rig up your Sony VENICE, F55, or F5 with this Solid Baseplate from Wooden Camera. Featuring an ARRI-standard rosette on each side, as well as 15mm LWS openings for pass-through rods, this fixed baseplate makes it easy to add accessories such as a lens support, follow focus, or matte box to your setup. There are two rod clamps on each side, so if you prefer you can use two sets of rods, one in the front and one in the back. The Solid Baseplate brings the camera up to the correct lens height when using a separately available ARRI-standard bridge plate such as the 19mm or 15mm Unified Bridgeplate.
Wooden Camera A-Box for VENICE Motion Picture Camera
EAN: 606184855636
This A-Box from Wooden Camera adapts the single 5-pin XLR on the side of the body of the Sony VENICE camera, to two standard 3-pin female XLRs. The A-Box can be easily installed and is designed to fit the shape of the camera without blocking the airflow around it. When phantom power is enabled on the camera, the A-Box passes it through to the microphones.
Wooden Camera Air EVF Extension Arm for Sony Venice DVF-EL200 EVF
EAN: 606184855810
The Wooden Camera Air EVF Extension Arm for Sony VENICE DVF-EL200 EVF is a lightweight extension arm that mounts on Wooden Camera`s AIR EVF Mount and also on the Sony viewfinder mount. The extension is 10.5` long and features 4` of additional extension, which makes it well suited for shooting when your camera is mounted on a tripod.
The extension slides securely into the Wooden Camera Air EVF mount or the original Sony EVF Mount. Then slide your EVF into the end of the extension. A built-in friction knuckle enables adjusting the angle of the EVF without having to loosen and tighten a thumbscrew. The arm also features an eyepiece leveler attachment point compatible with ARRI or other third-party eyepiece leveler rods. There are no tools required to install, operate, or remove the extension arm.
No tools required
Compatible with Wooden Camera and Sony EVF mount for Sony VENICE
Extends from 10.5 to 14.5`
Enables adjusting the tilt angle of an attached Sony VENICE EVF (not included) without having to loosen or tighten the friction knob to make adjustments
EAN: 606184855797
Rig up your Sony VENICE, F55, or F5 with this Solid Baseplate from Wooden Camera. Featuring an ARRI-standard rosette on each side, as well as 15mm LWS openings for pass-through rods, this fixed baseplate makes it easy to add accessories such as a lens support, follow focus, or matte box to your setup. There are two rod clamps on each side, so if you prefer you can use two sets of rods, one in the front and one in the back. The Solid Baseplate brings the camera up to the correct lens height when using a separately available ARRI-standard bridge plate such as the 19mm or 15mm Unified Bridgeplate.
Wooden Camera A-Box for VENICE Motion Picture Camera
EAN: 606184855636
This A-Box from Wooden Camera adapts the single 5-pin XLR on the side of the body of the Sony VENICE camera, to two standard 3-pin female XLRs. The A-Box can be easily installed and is designed to fit the shape of the camera without blocking the airflow around it. When phantom power is enabled on the camera, the A-Box passes it through to the microphones.
Wooden Camera Air EVF Extension Arm for Sony Venice DVF-EL200 EVF
EAN: 606184855810
The Wooden Camera Air EVF Extension Arm for Sony VENICE DVF-EL200 EVF is a lightweight extension arm that mounts on Wooden Camera`s AIR EVF Mount and also on the Sony viewfinder mount. The extension is 10.5` long and features 4` of additional extension, which makes it well suited for shooting when your camera is mounted on a tripod.
The extension slides securely into the Wooden Camera Air EVF mount or the original Sony EVF Mount. Then slide your EVF into the end of the extension. A built-in friction knuckle enables adjusting the angle of the EVF without having to loosen and tighten a thumbscrew. The arm also features an eyepiece leveler attachment point compatible with ARRI or other third-party eyepiece leveler rods. There are no tools required to install, operate, or remove the extension arm.
No tools required
Compatible with Wooden Camera and Sony EVF mount for Sony VENICE
Extends from 10.5 to 14.5`
Enables adjusting the tilt angle of an attached Sony VENICE EVF (not included) without having to loosen or tighten the friction knob to make adjustments
Wooden Camera Solid Baseplate for Sony VENICE, F55 & F5 Specs
General
| Compatibility | Sony VENICE, F55, and F5 |
| Rod Compatibility | LWS 15 mm |
| Rosettes | 2 x ARRI-Standard Rosettes |
| Dimensions | 4.75 x 4.75 x 1.25" / 119.4 x 119.4 x 31.8 mm |
| Weight | 0.9 lb / 410 g |
Packaging Info
| Package Weight | 0.905 lb |
| Box Dimensions (LxWxH) | 5.1 x 5 x 1.65" |
Wooden Camera A-Box for VENICE Motion Picture Camera Specs
| Compatibility | Sony VENICE Camera |
| Inputs | 2 x 3-Pin Female XLR |
| Outputs | 1 x 5-Pin Male XLR |
| Dimensions | 1.5 x 3.0 x 1.0" / 3.8 x 7.6 x 2.5 cm |
| Weight | 2.2 oz / 62 g |
Packaging Info
| Package Weight | 0.15 lb |
| Box Dimensions (LxWxH) | 5 x 3 x 1.5" |
Wooden Camera Air EVF Extension Arm for Sony Venice DVF-EL200 EVF Specs
General
| Dimensions | 10.5 x 1.5 x 2.5" / 26.67 x 3.81 x 6.35 cm |
| Weight | 7.13 oz / 202 g |
Packaging Info
| Package Weight | 0.485 lb |
| Box Dimensions (LxWxH) | 11.15 x 3.9 x 2.05" |
Wooden Camera D-Box for Sony VENICE (Gold Mount) Specs
General
| Plate Front / Battery Mount | Gold Mount |
Packaging Info
| Package Weight | 1.515 lb |
| Box Dimensions (LxWxH) | 8.75 x 6.4 x 4.25" |
In the Box
- 2-Year Manufacturer Warranty
No posts found
