Wooden Camera RED DIGITAL CINEMA DSMC2 Accessory Kit (Pro, 19mm)

Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras

EAN: 606184852185

The Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras attaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.

The plate incorporates 61 threaded 1/4 -20 mounting holes along the edges and top, as well as two 3/8 -16 threaded holes and 4 x 3/8 -16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8 -16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera s top fans to pass without obstruction.

Wooden Camera Easy Riser Plate for Select RED Cameras

EAN: 702534255511

The Easy Riser Plate for Select RED Cameras from Wooden Camera is a riser shim plate designed to work with the RED Weapon, Scarlet Weapon, Raven, and any other DSMC2 camera. It may be used alongside the 19mm Bridgeplate, 15mm Studio, or other RED style bridge plates to achieve correct lens height studio rods. It may also be combined with the LW 15mm Bracket (Weapon/Scarlet-W/Raven) for lightweight rods at correct lens height.

It is important to note that this riser is also compatible with our original LW 15mm Bracket for the RED Epic/Scarlet.

Wooden Camera Ultra Arm Monitor Mount (1/4 -20 to 1/4 -20, 3 Extension)

This 1/4 -20 to 1/4 -20 Ultra Arm Monitor Mount from Wooden Camera features a 3 extension connecting two double ball-joint clamps. A lever in the center of each clamp locks the joints on it, and the mounting points on the ends of the arm attach to your gear easily at the turn of integrated tightening knobs. Both ends feature rubber pads for more secure support.

The Ultra Arm system is interchangeable. Wooden Camera offers a variety of optional end-points that install into the ball sockets of the arm. These include NATO clamps, NATO rails, shoe mounts, super clamps, and even a Preston mounting bracket. Additionally, the system is compatible with many 3rd-party 25mm ball mount systems.

Key Features

• Full range ball-joint articulation
• Integrated tightening knobs
• Rubber pads
• Interchangeable end-points support optional NATO clamps, NATO rails, shoe mounts, super clamps, and more (see Accessories tab)
• Also compatible with 3rd-party 25mm ball mount systems

Wooden Camera Unified Bridgeplate (19mm)

EAN: 702534256563

The Wooden Camera Unified Bridgeplate (19mm) is an ARRI standard bridge plate with 19mm studio rods spaced 104mm center-to-center. It can be converted from RED standard height to ARRI standard height, making it compatible with any type of camera rig. The rubberized top coating prevents twisting and slotted design accommodates non-standard screw spacing.

When combined with Unified Baseplates, it offers correct rod height on cameras like the Sony FS7/FS5/F55/F5, Canon s C100 and C300 Mark II/C100/C300/C500, Blackmagic URSA Mini, Panasonic VariCam 35/VariCam LT, and risers for RED WEAPON/SCARLET-W/RAVEN/EPIC/SCARLET.

Wooden Camera Safety Dovetail Plate (12 )

EAN: 610079105492

The 12 Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.

Wooden Camera A-Box for RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and DSMC2

EAN: 702534255771

Plug XLR audio sources into your RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, or another DSMC2 camera body with the A-Box from Wooden Camera. The A-Box provides two 3-pin XLR inputs and outputs to the RED Base Expander Module using its 3.5mm stereo audio jack. It secures to your camera rig using the built-in 19mm rod clamp or with the included 15mm rod bushing. A 1/4 -20 mounting solution using a short bolt-on 19mm rod is also included for mounting the A-Box without rods.

The separately available RED Base Expander Module is required for the A-Box to connect to your RED camera.

Compatibility

RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and other DSMC2 cameras
RED Base Expander Module (required, not included)