Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras
EAN: 606184852185
The Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras attaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.
The plate incorporates 61 threaded 1/4 -20 mounting holes along the edges and top, as well as two 3/8 -16 threaded holes and 4 x 3/8 -16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8 -16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera s top fans to pass without obstruction.
Wooden Camera Easy Riser Plate for Select RED Cameras
EAN: 702534255511
The Easy Riser Plate for Select RED Cameras from Wooden Camera is a riser shim plate designed to work with the RED Weapon, Scarlet Weapon, Raven, and any other DSMC2 camera. It may be used alongside the 19mm Bridgeplate, 15mm Studio, or other RED style bridge plates to achieve correct lens height studio rods. It may also be combined with the LW 15mm Bracket (Weapon/Scarlet-W/Raven) for lightweight rods at correct lens height.
It is important to note that this riser is also compatible with our original LW 15mm Bracket for the RED Epic/Scarlet.
Wooden Camera 15mm Dual-Rod Bracket for RED DSMC2 Cameras
EAN: 702534255528
Combine this 15mm Dual-Rod Bracket from Wooden Camera with the separately available RED Easy Riser and equip lightweight 15mm rods at the correct lens height for RED DSMC2 BRAINS like the MONSTRO, HELIUM, GEMINI, WEAPON, EPIC WEAPON, SCARLET WEAPON, RAVEN, and other DSMC2 cameras.
Wooden Camera 15mm Support Rod (3 )
EAN: 610079106093
This is a single, 3 long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.
EAN: 606184852185
The Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras attaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.
The plate incorporates 61 threaded 1/4 -20 mounting holes along the edges and top, as well as two 3/8 -16 threaded holes and 4 x 3/8 -16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8 -16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera s top fans to pass without obstruction.
Wooden Camera Easy Riser Plate for Select RED Cameras
EAN: 702534255511
The Easy Riser Plate for Select RED Cameras from Wooden Camera is a riser shim plate designed to work with the RED Weapon, Scarlet Weapon, Raven, and any other DSMC2 camera. It may be used alongside the 19mm Bridgeplate, 15mm Studio, or other RED style bridge plates to achieve correct lens height studio rods. It may also be combined with the LW 15mm Bracket (Weapon/Scarlet-W/Raven) for lightweight rods at correct lens height.
It is important to note that this riser is also compatible with our original LW 15mm Bracket for the RED Epic/Scarlet.
Wooden Camera 15mm Dual-Rod Bracket for RED DSMC2 Cameras
EAN: 702534255528
Combine this 15mm Dual-Rod Bracket from Wooden Camera with the separately available RED Easy Riser and equip lightweight 15mm rods at the correct lens height for RED DSMC2 BRAINS like the MONSTRO, HELIUM, GEMINI, WEAPON, EPIC WEAPON, SCARLET WEAPON, RAVEN, and other DSMC2 cameras.
Wooden Camera 15mm Support Rod (3 )
EAN: 610079106093
This is a single, 3 long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.
Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras Specs
Mounting
| Connectors | 1 x 26-Pin for LCD 1 x 3-Pin for Trigger Handle |
| Mounting | 4 x 1/4"-20 Captive Screws |
| Accessory Mounting | 1/4"-20 27 x Edge 34 x Top 3/8"-16 2 x Top 2 x For LCD Adapter 4 x ARRI Anti-Twist |
| Dimensions | 4 x 4.25 x 0.75" / 101.6 x 107.95 x 19.05 mm |
| Weight | 6.08 oz / 172.4 g |
Packaging Info
| Package Weight | 0.445 lb |
| Box Dimensions (LxWxH) | 5.25 x 4.6 x 1.25" |
Wooden Camera Easy Riser Plate for Select RED Cameras Specs
| Dimensions | 0.5 x 4 x 4" / 12.7 x 177.8 x 177.8 mm |
| Weight | 0.4 lb / 181 g |
Packaging Info
| Package Weight | 0.355 lb |
| Box Dimensions (LxWxH) | 4.75 x 3.85 x 0.8" |
Wooden Camera 15mm Dual-Rod Bracket for RED DSMC2 Cameras Specs
| Color | Black |
Mounting
| Rod Standard | 15 mm (Unspecified Spacing) |
Packaging Info
| Package Weight | 0.205 lb |
| Box Dimensions (LxWxH) | 6 x 3 x 1.75" |
Wooden Camera Trigger Handle for RED WEAPON, SCARLET WEAPON, and RAVEN Cameras Specs
| Item Type | Topside Handle |
| Rotation | No |
| Built-In Controls | Remote Trigger |
Mounting
| Attachment Method | Attaches via 2 x Built-In 1/4"-20 Screw |
| Compatibility | Attaches Directly to Camcorder: RED DSMC2 |
| Accessory Mounting | Multiple x 1/4"-20 Thread Multiple x 3/8"-16 Thread Multiple x ARRI Anti-Twist 3/8"-16 Thread |
| Shoe Mounting | None |
| Rosettes | None |
| Rail Mounting | None |
Packaging Info
| Package Weight | 0.475 lb |
| Box Dimensions (LxWxH) | 5.3 x 4.2 x 2.85" |
Wooden Camera 15mm Support Rod (3") Specs
| Rod Size | 15 mm |
| Rod Length | 3" (7.5 cm) |
Packaging Info
| Package Weight | 0.08 lb |
| Box Dimensions (LxWxH) | 3.05 x 1.05 x 0.6" |
In the Box
- 4 x 1/4"-20 Captive Screw
- 2-Year Warranty
- 2 x Captured 3/8"-16 Riser Screws
- 2-Year Manufacturer Warranty
- 2 x 1/4"-20 Captive Screw
- 2-Year Manufacturer Warranty
No posts found
