Wooden Camera Sony FX6 Unified Accessory Kit (Base)

The base configuration of Wooden Camera's Sony FX6 Unified Accessory Kit provides accessory mounting points, a baseplate system with a sliding Arca-Swiss baseplate and integrated 15mm LWS rod clamps, and a pair of 12" long 15mm rods. This base system allows you to configure and expand your system as your needs evolve. The top plate attaches to your FX6 camera and provides 1/4" -20 threaded holes, as well as 3/8" -16 threaded holes with ARRI-style anti-twist divots.

The baseplate allows you to mount your camera on a variety of tripods and supports and quickly pull the camera off the tripod, leaving behind the rod clamps that support lens accessories, such as follow focus units and matte boxes. The camera plate utilizes an Arca-Swiss compatible design allowing you to quickly transfer the camera from the tripod to another support that accepts an Arca-Swiss baseplate. An integrated vertical 15mm rod rod clamp can be used to support an optional lens adapter foot.

Wooden Camera Unified Baseplate for URSA Mini, F55, F5

The Wooden Camera Unified Baseplate supports 15mm LWS rods at the correct lens height, and it offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit. This Kit allows you to support different lens adapters from Wooden Camera, Metabones, and other brands.

The Baseplate includes the Core Unit, a Lower Quick Dovetail tripod plate on the bottom, and a Dovetail Camera Plate for the Blackmagic URSA Mini and Sony F55/F5. Other Unified Baseplate Dovetail Plates are also supported, allowing for quick swaps with a variety of cameras.

The Baseplate provides two quick release options. You can remove the Dovetail Camera Plate only and leave the Core Unit with your rod pair behind, or you can remove the Core Unit from the Lower Quick Dovetail, in which case you'll have a dovetail on the bottom of the Core Unit that's compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig.

The Dovetail Camera Plate features a long slot along its center that lets you secure it to the camera with multiple screws (included), which can be set up to 2.8" (70mm) apart. It also has a non-slip rubber surface that will prevent the camera from twisting.

The Dovetail Camera Plate has an ARCA Swiss standard dovetail compatible with many third-party products. It also has threaded 1/4" -20 threaded holes on the bottom for attaching to gimbals or other compatible tripod plates. The Lower Quick Dovetail has 1/4" -20 and 3/8" -16 threaded holes for attaching to tripod plates or ARRI standard bridgeplates, such as the Wooden Camera Unified Bridgeplates.

The Unified Baseplate can also be upgraded for VCT-14 compatible mounting options. Simply attach it to the optional Unified VCT Wedge Plate, which can then be mounted on the Unified VCT-14 Tripod Plate, also sold separately. The Unified Baseplate is backward compatible with Wooden Camera's original Quick Dovetails (Standard, DSLR, and Large).

Key Features

• Supports 15mm LWS rods at the correct lens height
• Offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit (for lens adapter support)
• Includes the Core Unit, Lower Quick Dovetail tripod plate, and Dovetail Camera Plate
• Two quick release options remove Core Unit or remove Dovetail Camera Plate
• Core Unit features a dovetail on the bottom, compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig
• Dovetail Camera Plate features an ARCA Swiss standard dovetail and threaded holes for attaching to gimbals or other compatible tripods plates
• Lower Quick Dovetail offers threaded holes for attaching to tripod plates or ARRI standard bridgeplates
• Long slot along the center allows multiple screws to be attached to the camera, set up to 2.8" (70mm) apart
• Anti-twist, non-slip rubber surface
• Upgradable for VCT-14 compatible mounting options
• Additional Lower Quick Dovetail and Dovetail Camera Plates can be purchased for quick swap capability
• Backward compatible with original Wooden Camera Quick Dovetail

EAN: 702534256471

Wooden Camera Top Plate for Sony FX6

Mount accessories onto the top of your Sony FX6 camcorder with this Top Plate from Wooden Camera. The Top Plate is contoured to perfectly fit your camera, while the mounting screws secure the plate to your camera, helping to distribute the weight and stress of mounted accessories. The plate features numerous 1/4" -20 and 3/8" -16 tapped holes, as well as ARRI-style accessory mounts with anti-twist divots.

Contoured

The underside of the plate is relieved of metal, matching your camera's contour while increasing the plate's resistance to flexing, preventing undue stress to your camera's body.

EAN: 606184860029

Wooden Camera 15mm Support Rod (12" )

This is a single, 12" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.

EAN: 610079106123