Zacuto C200 EVF Recoil Pro V2

The Zacuto C200 EVF Recoil Pro V2 is a shoulder rig designed specifically for the Canon C200 camera. It includes the Zacuto C200 Top Plate, Rosette Trigger Grip, Recoil Handle, and VCT Pro Baseplate. This rig follows Zacuto s Recoil Rig philosophy of placing the balance point directly over your shoulder, thereby putting the camera body behind the shoulder and relocating focus, monitoring, and camera controls forward to create a lighter, shorter, and properly balanced rig.

The C200 Top Plate is custom-designed to fit your C200 and provides threaded accessory mounting holes, an integrated Z-Rail, and a 15mm rod clamp with a spring-loaded locking lever. The Trigger grip enables mounting the camera s handgrip on an articulating extendable arm, and the included Recoil Handle is a maple handgrip with an integrated cold shoe, Z-Rail, and 15mm rod clamp. Lastly, the VCT Pro Baseplate includes 15mm rods and rod clamps and enables balancing your camera on your shoulder or mounting on a tripod, swiftly switching between the two without having to break down your setup or remove accessories.

Zacuto VCT Pro Baseplate

With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1" , and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4" -20 threaded holes on the side providing additional mounting options. 1/4" -20 and 3/8" -16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4" -20 and one 3/8" -16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

Key Features

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4" -20 and 3/8" -16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1" optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4" -20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4" -20 and 3/8" -16 screws supplied
• Made in the USA

Zacuto Rosette Trigger Grip

The Zacuto Rosette Trigger Grip is an adjustable grip relocator for ARRI rosette-mount camera or lens grips. It s designed to attach to camera supports offering an ARRI rosette, including the Zacuto VCT Pro baseplate. The entire unit can be rotated a full 360° at the quick press of a lever, and the component that holds your grip can be adjusted forward and backward with the press of another lever. Unlike with standard handgrips, these levers don t need to be unscrewed and can just be pressed on the fly. The entire unit can also be adjusted in length by loosening another lever.

Zacuto C200 Top Plate

The Zacuto C200 Top Plate is custom-designed for your Canon C200, forming the base for accessorizing your camera without stressing its body. It has a built-in Z-Rail which is perfect for adding the Recoil Handle, or you can attach your Canon Handle to the plate instead. It has a multitude of 1/4" -20 and 3/8" -16 screw holes. At the back of the plate is a 15mm rod clamp with a spring-loaded locking lever, and a grooved mount for the Canon C200 LCD. You can also mount the Canon LCD to the built-in Z-Rail if so desired.

The Top Plate features a built-in Z-Rail, 15mm rod clamp, and 51 1/4" -20 and two 3/8" -16 threaded mounting holes, all providing accessory mounting options to extend the ergonomics of your camera.

The spring-loaded locking lever allows you to tighten or loosen the clamp, even when you can t rotate the lever completely.

Zacuto Recoil Handle

The Zacuto Recoil Handle is a maple-wood-lined handgrip that mounts to a Z-Rail or compatible mounting rail. This provides a comfortable yet secure handle for your camera rig, and the rail-style mounting allows you to adjust the handle along the length of the rail to improve your rigs balance. It features two cold shoe mounts (one vertical and one horizontal) and secures both mounts with a single lever. The integrated 1/4" -20 threaded mounting hole, and 15mm rod clamps further expand on the Recoil Handle s usefulness.

Machined aluminum construction provides a balance of strength and weight, and the unit is anodized for corrosion and wear resistance. Large, spring-loaded locking levers provide a good grip and the capability of tightening the clamps without rotating the levers throughout the entire 360° range.

Key Features

The Recoil Handle clamps securely along the length of a Zacuto Z-Rail, allowing you to adjust the balance of your camera or camera rig. In addition to the Z-Rail, the handle is compatible with a variety of rails including: NATO, SWAT, RED, Picatinny, and Wooden Camera. You can mount the handle with the cold shoes or the rod clamps.

The maple-wood grip linings remain cool in hot weather and are generally considered to be more comfortable to hold. The wood is tooled to provide finger slots for increased comfort and grip.

The two cold shoes incorporate built-in stoppers and a single lever clamps both shoes simultaneously, securing your accessories. A 1/4" -20 accessory mounting point is threaded into the side of the cold shoe mounts.

Two offset 15mm rod clamps allow you to mount rods at right angles to each other. Each rod clamp features its own spring-loaded locking lever.