Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Zacuto VCT Pro Baseplate
With built-in ergonomic shoulder pad, 10 sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.
A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1 , and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8 riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.
The VCT Pro Baseplate features a 10 sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.
An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4 -20 threaded holes on the side providing additional mounting options. 1/4 -20 and 3/8 -16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5 15mm rods are included. One 1/4 -20 and one 3/8 -16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.
Key Features
Zacuto Sony FX9 Dual Trigger Grips
The Sony FX9 Dual Trigger Grips from Zacuto make up the 15mm LWS rod-mount handgrip extension set featuring one wooden handgrip and one grip relocator for the Sony PXW-FX9 camera grip. Each joint can be individually rotated a full 360° with the press of a lever there is no need to screw or unscrew any knob or lever.
The length of the extensions can be adjusted and each can be flipped up completely when you want to rest your camera rig on the ground. Scale markings on top enable you to easily align both handles or return to your chosen positions.
Features
Zacuto LANC Extension Cable (13.8 )
This 13.8 LANC Extension Cable from Zacuto features a right-angle male 2.5mm mini jack and a 2.5mm female plug. This heavy-duty, 24 AWG cable is UL approved and ideal for use with select Zacuto grip relocators.
With built-in ergonomic shoulder pad, 10 sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.
A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1 , and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8 riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.
The VCT Pro Baseplate features a 10 sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.
An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4 -20 threaded holes on the side providing additional mounting options. 1/4 -20 and 3/8 -16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5 15mm rods are included. One 1/4 -20 and one 3/8 -16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.
Key Features
- Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
- 10 sliding track (with spring-loaded lever) for balance adjustment after lens changes
- VCT14-compatible V-wedge
- 1/4 -20 and 3/8 -16 tripod mount holes
- Ergonomic gel polymer shoulder pad
- 15mm LWS rod adapter on the rear
- Front rod adapter is vertically adjustable 1 optional 1.8 riser available from Zacuto for RED cameras
- ARRI M6 rosette
- Three 1/4 -20 threaded holes for accessories
- Includes two 6.5 15mm rods
- 1/4 -20 and 3/8 -16 screws supplied
- Made in the USA
Zacuto Sony FX9 Dual Trigger Grips
The Sony FX9 Dual Trigger Grips from Zacuto make up the 15mm LWS rod-mount handgrip extension set featuring one wooden handgrip and one grip relocator for the Sony PXW-FX9 camera grip. Each joint can be individually rotated a full 360° with the press of a lever there is no need to screw or unscrew any knob or lever.
The length of the extensions can be adjusted and each can be flipped up completely when you want to rest your camera rig on the ground. Scale markings on top enable you to easily align both handles or return to your chosen positions.
Features
- 15mm LWS rod mount handgrip set
- Includes a wooden handgrip and a grip relocator for the Sony FX9 camera grip
- 360° rotation at the press of a lever-no screwing/unscrewing
- Adjustable length handles
- Scale markings for easily matching the positions of the handgrips
Zacuto LANC Extension Cable (13.8 )
This 13.8 LANC Extension Cable from Zacuto features a right-angle male 2.5mm mini jack and a 2.5mm female plug. This heavy-duty, 24 AWG cable is UL approved and ideal for use with select Zacuto grip relocators.
Zacuto VCT Pro Baseplate Specs
Mounting
Rod Standard | 15 mm LWS / 60 mm Spacing |
Included Rods | 2 x 6.5" / 16.5 cm 15 mm Rod |
Accessory Mounting | Side: 3 x 1/4"-20 Female Thread |
Camera Mounting | Quick Release Plate with 1/4"-20 Male Screw, 3/8"-16 Male Screw |
Tripod Mounting | 1/4"-20 Female Thread, 3/8"-16 Female Thread, VCT-14 |
Rod Ports | 2 x 15 mm Rod Port |
Rosettes | Side: 1 x ARRI Rosette w/ M6 Female Thread |
General
Support Type | Shoulder Support |
Grip Type | None |
Camera Compatibility | Universal |
Dimensions | 14.25 x 4.25 x 2" / 36.2 x 10.8 x 5 cm (with Rods) |
Weight | 2.1 lb / 0.96 kg |
Packaging Info
Package Weight | 2.85 lb |
Box Dimensions (LxWxH) | 11.7 x 10.4 x 7.8" |
Zacuto Sony FX9 Dual Trigger Grips Specs
Item Type | Dual Handgrips |
Rotation | Yes |
Built-In Controls | Remote Trigger |
Mounting
Attachment Method | Attaches via Rod Ports |
Rod Standard | 15 mm LWS / 60 mm Spacing |
Rod Ports | 2 x 15 mm Rod Port |
Accessory Mounting | None |
Shoe Mounting | None |
Rosettes | Yes |
Rail Mounting | None |
General
Materials | Aluminum, Wood |
Packaging Info
Package Weight | 2.085 lb |
Box Dimensions (LxWxH) | 10.4 x 9.5 x 2.4" |
Zacuto LANC Extension Cable (13.8") Specs
Connectors | 2.5 mm (male), 2.5 mm (female) |
Cable Length | 13.8" / 35 cm |
Packaging Info
Package Weight | 0.055 lb |
Box Dimensions (LxWxH) | 6.05 x 4.1 x 0.45" |
In the Box
- 2 x 6.5" 15mm Rods
- 1/4"-20 Camera Screw
- 3/8"-16 Camera Screw
- Zacuto Axis Mini EVF Mount
- Zacuto Sony FS7 & FX9 Top Plate
- Zacuto Sony FX9 LCD Axis Adapter
- 2-Year Manufacturer Warranty
No posts found