Zacuto Z-Finder Recoil Pro Rig for Sony BURANO

Perform handheld shots with your Sony BURANO in comfort and add accessories with this Z-Finder Recoil Pro Rig from Zacuto. This shoulder-mounted rig includes a VCT Pro baseplate, a top plate for the BURANO, left and right side rails, a tactical handle, and the Z-Finder EVF for the BURANO.

The baseplate features a V-wedge tripod mount with 1/4" -20 and 3/8" -16 threads, 1/4" -20 accessory threads, and 15mm LWS rod ports with removable/extendible 15mm rods. The top plate features multiple mounting threads, a NATO rail, and 15m rod ports. The side rails feature 1/4" -20 and 3/8" -16 accessory threads, as well as ARRI-style rosettes with a M6 thread. The tactical handle can be mounted onto the top plate using its NATO clamp, providing a comfortable wooden finger grip and a shoe mount. The Z-Finder replaces the Sony viewfinder and mounts right onto the camera's monitor to provide a viewfinder, magnification, and a clear image view.

Zacuto VCT Pro Baseplate

With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1" , and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4" -20 threaded holes on the side providing additional mounting options. 1/4" -20 and 3/8" -16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4" -20 and one 3/8" -16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

Key Features

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4" -20 and 3/8" -16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1" optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4" -20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4" -20 and 3/8" -16 screws supplied
• Made in the USA

Zacuto Z-Finder for Sony BURANO

The Z-Finder for Sony BURANO from Zacuto is an optical viewfinder that uses 2.5x magnification to turn your camera's LCD monitor into a clear, easy-to-focus viewfinder. Designed specifically for use with the Sony BURANO, the Z-Finder features a flip-up design and a diopter wheel for focusing. It includes two extender frames for farsighted use and can be used with separately available drop-in diopters for further correction. This finder's large, lightproof eyecup also increases the stability of your handheld footage by adding a point of contact between the camera and your eye. A built-in aluminum sun mask on the Z-Finder protects your LCD screen from sunlight. One installed and one additional Anti-Fog disks keep your view clear in humid or cold environments.

Note:

WARNING: The Z-Finder is a magnifier, and as such will magnify the sun, which can damage the LCD screen if the sun is allowed to shine directly through the Z-Finder lens. Use the enclosed lens cap to block light from entering your Z-Finder when not in use.

Compatibility

Sony BURANO cinema camera

EAN: 781288000240

Zacuto Top Plate for Sony BURANO

Designed for attaching accessories on top of your Sony BURANO cinema camera, the cheese-style Top Plate from Zacuto can be used with or without the original Sony handle mounted on your camera. It provides an integrated NATO rail, 15mm rod ports, and multiple accessory threads around the plate. Use the rail to attach accessories like a monitor arm or top handle such as the Tactical Handle, and use the 15mm brackets to support rod-mounted lens motors or a matte box.

EAN: 781288000271

Zacuto Tactical Handle

Add a versatile handle to your camera rig or cage with the Tactical Handle from Zacuto, which features a slim, adjustable design that allows you to use it as a top handle or side handgrip. It features a built-in Z-Rail/NATO-type rail on top, a shoe mount, and multiple 1/4" -20 and 3/8" -16 mounting threads that enable you to mount a variety of accessories. Its grip features finger grooves and is lined with wood for a smooth, comfortable feel.

The Tactical Handle mounts onto any Z-Rail/NATO rail, and the Z-Rail jaw clamp can be twisted and oriented in multiple ways to work on horizontal or vertical Z-Rails. The spring-loaded locking lever enables tightening or loosening of the joint, so it can be reconfigured as a top or side handle. The handle is suitable for use with small cameras such as the Panasonic GH5 Mark II.

Compatibility

Small mirrorless and DSLR cameras such as the Panasonic GH5 Mark II

Also compatible with but not limited to:
Zacuto 3" Z-Rail
Zacuto 5" Z-Rail
Zacuto Universal Monitor Mount
Zacuto ACT Recoil Shoulder Rig
Zacuto DSLM or DSLM Cage
Zacuto Axis Mini Mount
Zacuto Axis Micro Mount
Zacuto EVF Mounts

Zacuto Side Rails for Sony BURANO (Set of 2)

This pair of Side Rails is designed as part of the Zacuto handheld rig for the Sony BURANO cinema camera. These durable rails require the separately available top plate and VCT baseplate to create a full rig for your camera. The rails each provide ARRI-style rosettes with M6 threads, as well as 1/4" -20 and 3/8" -16 threads for adding a variety of accessories.