The LanParte Camera Cage with 501-Compatible QR Plate & R/S Top Handle for Sony a7R IV integrates a Manfrotto 501-compatible baseplate system within the cage, making it easy to slide your camera into and out of the cage for lightweight stripped-down operation. The aluminum cage provides a protective exoskeleton for your camera, protecting it from the rigors of the production. The included top handle provides an ergonomic grip for low-angle shots or carrying the camera, as well as run/stop control via LANC protocols. Together, the cage and top handle feature numerous accessory mounting points that allow you to attach optional accessories, such as monitors, mics, articulating arms, and lights, to your rig without stressing your camera s delicate chassis.
Mount your camera on the baseplate and slide that into the cage. An adjustable tension lever lock secures the plate into the cage, keeping your camera secure and protected. While protecting your camera, the cage allows access to all the functions as well as card slots and battery compartment. The 1/4" -20 threaded holes along the sides and top of the cage provide ample mounting opportunities for optional articulating arms of other accessory mounting instruments. The 3/8" -16 threaded mounting holes with anti-twist divots are located, one each, on the top of the cage and on the side, and a single cold shoe is built-in at the top for additional accessories.
Integrated Baseplate
The cage features an integrated baseplate system. This allows you to mount your camera onto the included Manfrotto 501-compatible camera plate, so you can quickly transfer your camera between the cage to a different application that requires a stripped-down camera, such as a drone, and back again.
Key Features
- Ergonomic design
- 1/4" -20 and 3/8" -16" mounting threads all around for accessories
- The two 3/8" -16 threaded holes are accompanied by anti-twist divots
- Provides access to all ports, slots, and controls of the camera
- Raised front panel keeps the camera square in the cage and prevents twisting
Top Handle
Run/Stop
The top handle uses LANC protocols and has a run/stop button at the top of the handle.
Mounting
The handle attaches to your cage using a 3/8" -16 locking knob with ARRI-compatible anti-twist pins.
Accessory Mounting
The top handle features numerous 1/4" -20 and 3/8" -16 threaded mounting holes along both sides, as well as ARRI-compatible 3/8" -16 holes with anti-twist divots.
Cold Shoes and Rod Mount
The handle features a cold shoe on both the front and rear, as well as a 15mm rod clamp.
EAN: 840534120092
LanParte A7R4-C Specs
| Support Type | Cage |
| Grip Type | Topside Handgrip |
| Camera Compatibility | Sony a7R IV |
Mounting
| Rod Standard | 15 mm Single Rod |
| Included Rods | 1 x 7.9" / 20 cm 15 mm Aluminum Rod |
| Battery Plate Type | None |
| Accessory Mounting | Cage, Sides: 11 x 1/4"-20 Female Thread, 1 x Anti-Twist 3/8"-16 Female Thread Cage, Top: 5 x 1/4"-20 Female Thread, 1 x Anti-Twist 3/8"-16 Female Thread Top Handle, Sides: 18 x 1/4"-20 Female Thread, 2 x 3/8"-16 Female Thread Top Handle, Top: 4 x ARRI Anti-Twist 3/8"-16 Female Thread Top Handle, Front: 1 x ARRI Anti-Twist 3/8"-16 Female Thread Baseplate, Front: 2 x M4 Female Thread |
| Camera Mounting | Manfrotto 501 Plate with 1/4"-20 Male Screw, 3/8"-16 Male Screw |
| Tripod Mounting | Baseplate: 1/4"-20 Female Thread, 3/8"-16 Female Thread |
| Rod Ports | Top Handle, Front: 1 x 15 mm Rod Port |
| Shoe Mounting | Cage, Top: 1 x Cold Shoe Top Handle, Top: 2 x Cold Shoe |
| Rosettes | None |
General
| Materials | Aluminum |
| Dimensions | 7.8 x 5.5 x 2" / 198 x 140 x 50 mm |
| Weight | 17.6 oz / 499 g |
In the Box
- LanParte Camera Cage with 501-Compatible QR Plate & R/S Top Handle for Sony a7R IV
- Baseplate
- 4 x Screw
- 2 x Allen Key
- Flat Screwdriver
- LANC Cable
- LANC to Multi Connector
- 15mm Rod (8")
- 2-Year Warranty
Customer reviews
Recommendation for purchase
