The Lanparte Professional DSLR Kit V2 provides you with a fully loaded 15mm rod support rig for DSLR and mirrorless cameras. The rig is built around a 15mm rod V-lock bridge plate and a large C-shaped support frame, with a pair of 14.4" long rods provided to support an included follow focus and matte box. For shoulder-mounted configurations, the kit comes with an adjustable dual handgrip system, a padded shoulder support, and a 7" HDMI monitor for framing and focusing your shots. The monitor is mounted to the top of the rig using an adjustable Magic Arm EVF/monitor mount. Rounding out the kit is a 150Wh V-mount lithium-ion battery and a V-mount power adapter plate. When not in use, key components of the rig can be safely stored inside a hard protection case with custom pre-cut foam interior.
Your camera attaches to the bridge plate via a 1/4" -20 or 3/8" -16 screw. The bridge plate offers 1.6" of height adjustment and features a quick-release camera plate for easy removal of your camera from the rig. At the bottom of the bridge plate is a V-lock for mounting onto V-lock tripod adapter plates, or for attaching the v-lock shoulder support directly behind the camera. There are also 1/4" -20 and 3/8" -16 threaded holes for direct attachment to tripod heads. The C-shaped support frame mounts onto the rods included with the bridge plate, providing 1/4" -20 and 3/8" -16 accessory mounting threads and 15mm rod clamps at the top for adding an included top handle. In addition to the top handle, rods on top of the rig are useful for attaching the Magic Arm when you want to use the 7" HDMI monitor.
The included matte box fits lenses with a maximum front outer diameter of 150mm. It features two rotating 4 x 5.65" filter stages, filter tray inserts for compatibility with 4x4" filters, and a swing-away design for rapid lens changes. Removable top and side flags are included to block unwanted light from hitting your lens. Other accessories that mount in front of the camera are the Universal Grip V2 and follow focus, which both utilize a clamping design that lets you attach them to the 15mm rods without having to remove the matte box. The follow focus features integrated A and B hard stops that let you set start/end points on DSLR lenses with continuously rotating focus rings. The follow focus features a 0.8 pitch drive gear, which can be positioned on either side of the gearbox. For use with DSLR lenses that lack an integrated focus gear rings, an adjustable gear ring comes included. A lens support is also included when using long and heavy telephoto lens.
The V-mount battery adapter plate can be mounted on 15mm rods or directly on top of the shoulder support (when the shoulder support isn t mounted behind the bridge plate). It features a V-mount for attaching the included 150Wh lithium-ion battery and provides DC outputs with different voltages (5, 7.2, 12, and 15V). The battery can be recharged using the AC power adapter included with the Battery Pinch. To power a Canon 5D, 7D, 60D or other select Canon DSLRs from the adapter plate, an LP-E6 dummy battery is included. Additionally, the Battery Pinch has a built-in HDMI splitter. A 25" HDMI to mini HDMI with right-angle connector cable is provided for sending your camera output to the splitter input, and 39" and 59" HDMI cables are provided for outputting the signal to two different devices from the splitter.
Please see the links below for more information on the components of this kit.
LanParte Universal Grip V2 for 15mm Rods
The Lanparte Universal Grip V2 is an adjustable dual handle system for 15mm LWS rod support rigs. Each handle features three points of adjustment, letting you position each handgrip at the desired height, angle, and distance from the rods. Silica-gel surface on the handles provide a comfortable, non-slip grip. For easy attachment and removal of the system without having to remove other rod-mounted accessories, the Universal Grip V2 utilizes a quick release 15mm rod clamp, which locks in place using a single lever.
- Three points of adjustment for grip placement
- Spring-loaded steel spindle joint locking system
- Quick release 15mm rod clamp with single tightening lever
- 1/4" -20 and 3/8" -16 threaded holes on each arm for mounting accessories
- CNC-machined aluminum construction
- Hollowed-out design to reduce weight
EAN: 840534107048
LanParte MB-02 4 x 5.65" Rod-Mounted Swing-Away Matte Box for 15mm Rods
The LanParte MB-02 4 x 5.65" Rod Mounted Swing Away Matte Box for 15mm Rods is a 4 x 5.65" matte box that features carbon fiber and aluminum construction that makes it lightweight and durable. Designed to work with lenses with a maximum outer diameter of 150mm, the matte box features two rotating 4 x 5.65" (Panavision-sized) filter stages and mounts onto lightweight 15mm rods. The matte box incorporates a swing-away design for rapid lens changes, and features 1" of height adjustment that allows you to adjust for non-standard camera heights.
Both filter trays can slide in the rotating stages, allowing you to adjust their height. The included removable top and side flags can be precisely set and locked to block stray light from flaring your lens. An anti-reflection fabric sleeve is included to protect your image by blocking stray light from behind the camera sneaking around the lens and bouncing off of filters in the matte box. Please note the matte box does not include any support rods.
Lightweight Construction
The matte box itself is made out of carbon fiber, with aluminum used for the support structure. This provides a lightweight yet sturdy unit that is appropriate for shooting hand-held or with stabilizer rigs, when every ounce counts.
Swing Away Design
The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don t have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out.
Height Adjustable
Sometimes during production, things just don t line up. The height adjustable swing away bracket allows you to adjust the height of the matte box up to 1" to compensate for misalignments or non-standard lens center height.
Rotating 4 x 5.65 Filter Trays
The matte box features an independently rotating 4 x 5.65" filter trays this allows you to simultaneously rotate two filters, such as one polarizer and one graduated filter, or even two graduated filters, for creative effect. An included 4 x 4 insert allows you to use a 4 x 4" filter in the 4 x 5.65" tray, the insert prevents light from sneaking around the smaller filter.
Top & Side Flags
- The removable top and side flags provide you additional flare control and attach to the matte box with a lockable hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them
LanParte Universal Grip V2 for 15mm Rods Specs
Item Type | Dual Handgrips |
Mounting
Attachment Method | Attaches via Rod Ports |
Rod Standard | 15 mm LWS / 60 mm Spacing |
Rod Ports | 2 x 15 mm Rod Port |
Accessory Mounting | Arm 1 x 1/4"-20 Thread 1 x 3/8"-16 Thread |
Shoe Mounting | None |
Rosettes | Yes |
Rail Mounting | None |
General
Dimensions | 13.5 x 8.9 x 1.2" / 34.3 x 22.6 x 3 cm |
Weight | 2.46 lb / 1.12 kg |
Packaging Info
Package Weight | 2.815 lb |
Box Dimensions (LxWxH) | 15.3 x 8.65 x 2.5" |
LanParte MB-02 4 x 5.65" Rod-Mounted Swing-Away Matte Box for 15mm Rods Specs
General
Attachment Method | Rod Ports |
Filter Stages | 2 x Rotating Stage (4 x 4" / 4 x 5.65") |
Degree of Rotation | 360° |
Lens Compatibility | 150 mm Opening |
Rod Standard | 15 mm LWS / 60 mm Spacing |
Swing-Away | Yes |
Flags | 1 x Top Flag 2 x Side Flag |
Material | Carbon Fiber, Aluminum |
Packaging Info
Package Weight | 5.8 lb |
Box Dimensions (LxWxH) | 18.268 x 11.339 x 5.984" |
LanParte Follow Focus V2 with Hard Stops for 15mm Rods Specs
Included Drive Gear | 0.8 MOD |
Rod Standard | 15 mm LWS / 60 mm Spacing |
Number of Sides | Single-Sided |
Built-In Hardstops | 2, Fixed |
Marking Disk | Yes |
Switchable Handwheel Speed | No |
Dimensions | 7.44 x 4.31 x 3.16" / 188.97 x 109.6 x 80.25 mm |
Weight | 1.12 lb / 0.51 g |
Packaging Info
Package Weight | 1.535 lb |
Box Dimensions (LxWxH) | 9.55 x 5.75 x 4.15" |
In the Box
- 2-Year Manufacturer Warranty
- Flexible Anti-Reflection Sleeve
- 2 x 4 x 5.65 Filter Holders
- Top Flag
- 2 x Side Flags
- 2-Year Manufacturer Warranty
- Magnetic Marking Disc
- 0.8 Pitch Drive Gear
- LanParte Gear Ring with Pin-Lock Tightening Mechanism for Follow Focus
- 2-Year Manufacturer Warranty
- 2 x 15mm Rod (14.4")
- Quick-Release Plate
- 1/4"-20 Camera Screw
- 3/8"-16 Camera Screw
- 2-Year Warranty
- 2 x Rods (7.8")
- 2-Year Warranty
- LanParte 15mm Aluminum Rod (Pair, 7.9")
- 2-Year Manufacturer Warranty
- LanParte Magic-Arm Rod Clamp
- 2-Year Warranty
- LanParte 15mm Aluminum Rod (Pair, 7.9")
- 2-Year Warranty
- 3 x LanParte Yellow-Tip Camera DC Power Spring Cable for Battery Pinch (5.5/2.1mm)
- LanParte Red-Tip Camera DC Power Spring Cable for Battery Pinch (3.5/1.35mm)
- AC Power Adapter
- 2-Year Manufacturer Warranty
- 2 Years Manufacturer Warranty
- 2 Years Manufacturer Warranty
- 2-Year Manufacturer Warranty
No posts found