LanParte Shoulder-Mount Combo Rig Kit with ABS Protection Case

LanParte Bridge Plate

The Lanparte Bridge Plate features a height-adjustable baseplate with dual 15mm LWS rod clamps and a quick-release camera plate. The height of the baseplate is adjustable up to 1.6 by loosening a single knob, allowing you to achieve proper lens height when using a matte box or follow focus. A pair of 11.8 long 15mm rods come included.

The quick-release plate features a dovetail design that slides or drops onto the baseplate, locking into place using a release lever. The plate includes 1/4 -20 and 3/8 -16 camera screws, with threads on the side of baseplate provided for storing the unused screw. A safety lock prevents the plate from sliding off the baseplate when attached. For mounting on tripods and other equipment, there are 1/4 -20 and 3/8 -16 threaded holes on the bottom of the baseplate.

• Baseplate with 1.6 height adjustment
• 15mm LWS rod clamps threaded ends for rod extension
• Pair of 11.8 15mm rods included
• Quick-release dovetail plate with 1/4 -20 and 3/8 -16 screws
• Release lever with integrated safety trigger
• 1/4 -20 and 3/8 -16 holes for storing unused camera screw
• Bubble level
• 1/4 -20 and 3/8 -16 tripod screws
• CNC machined aluminum construction

LanParte C-Arm

EAN: 840534109011

Add more accessories to your camera with the C-Arm from Lanparte. By arching over the top of your camera setup, the C-Arm effectively provides a second set of 15mm rods for attaching useful gadgets such as follow focus motors, articulating arms, recorders, monitors, and more. An integrated shoe-mount can hold a light, a microphone, or other accessory. The top portion folds away from the camera for easier lens changes. To accommodate different camera heights, the top rod section is adjustable to achieve the proper rod-to-optical-center distance.

C-shaped support with 1/4 and 3/8 threads

Hollowed-out design makes it lightweight at 10 oz

Height-adjustable

You can attach a shoe mount (not included) onto it

Anti-drop knob

LanParte Top Handle for 15mm Rods

EAN: 840534107031

The Lanparte Top Handle is designed for camera cages and rigs that use or accept 15mm LWS rods positioned above the camera. It is constructed from CNC machined aluminum and features a dual 15mm rod clamp and a non-slip silica-gel grip. A pair of 7.87 long aluminum rods come included.

LanParte Universal Grip V2 for 15mm Rods

EAN: 840534107048

The Lanparte Universal Grip V2 is an adjustable dual handle system for 15mm LWS rod support rigs. Each handle features three points of adjustment, letting you position each handgrip at the desired height, angle, and distance from the rods. Silica-gel surface on the handles provide a comfortable, non-slip grip. For easy attachment and removal of the system without having to remove other rod-mounted accessories, the Universal Grip V2 utilizes a quick release 15mm rod clamp, which locks in place using a single lever.

• Three points of adjustment for grip placement
• Spring-loaded steel spindle joint locking system
• Quick release 15mm rod clamp with single tightening lever
• 1/4 -20 and 3/8 -16 threaded holes on each arm for mounting accessories
• CNC-machined aluminum construction
• Hollowed-out design to reduce weight

LanParte Follow Focus V2 with Hard Stops for 15mm Rods

EAN: 840534104016

The Lanparte Follow Focus V2 clamps onto 15mm LWS rods, allowing you to smoothly and accurately pull focus with cinema and DSLR lenses equipped with gear rings. Its quick release design that lets you easily snap it onto the rods without having to remove other rod-mounted accessories, such as a matte box. Integrated into the follow focus are A and B hard stops, letting you set start/end points on DSLR lenses that have continuously rotating focus rings. Additionally, the follow focus features an ARRI standard accessory port for using optional focus whips and speed cranks. A standard 0.8 pitch gear comes includes, which can be positioned on either side of the gearbox, as well as a removable magnetic marking disc. Also included is an adjustable gear ring for use with DSLR lenses that lack integrated focus gear rings.

Key Features

• Clamps onto 15mm LWS rods
• Integrated A/B hard stops
• Copper gear and precision bearing
• Standard 0.8 pitch drive gear included
• Drive gear can be flipped to either side of gearbox
• Sliding dovetail design for adjusting to different sized lenses
• Removable magnetic marking disc
• ARRI standard 12mm accessory port
• CNC machined aluminum components
• Adjustable lens gear ring included

LanParte Magic Arm

Mount a 1/4 -20 accessory to your 15mm LWS rig with the Lanparte Magic Arm and gain the flexibility to fit it in nearly any orientation you require. Once you have the accessory positioned, twist the knob to secure the arm, holding your mounted accessory fast.

Angle-adjustable

CNC machined aluminum construction

LanParte Shoulder Support for DSLR Camera Rig

EAN: 840534108014

Carry your rig on your shoulder by incorporating this Shoulder Support from Lanparte. Using dual 15mm clamps, the Shoulder Support secures to 15mm LWS rigs. A riser clamp is included for height adjust-ability. The shoulder pad is arced to comfortably sit on your shoulder for long periods of time. A pair of 15mm rods are also included in order to more easily incorporate this shoulder plate into your existing rig or extend it further back to fit more accessories.

Ergonomic design

Compatible with 15mm rod systems

Power supply system can be mounted on it

A standard Height Raiser Clamp is included

Compatible with Offset Clamp and Adjustable Offset Clamp (sold separately)

Hollow design makes unit lightweight at 21.9 oz

Precision CNC machined

LanParte Offset Clamp

EAN: 840534113063

Use the Lanparte Offset Clamp to offset the shoulder mount from the rest of your 15mm LWS rig, allowing your camera to be within your line-of-sight for checking focus and composition without the aid of an external monitor or EVF.

Offsets base plate from shoulder pad

Two double 15mm rod clamps

Hollow design saves weight

Streamlined knob

CNC machined

LanParte ABS Protection Suitcase for DSLR Camera Rig Kit

EAN: 840534112028

The watertight Lanparte ABS Protection Suitcase features a hard ABS exterior and two custom-cut, stacking foam insert layers designed to hold and protect key components of Lanparte DSLR camera rig kits. A top handle is provided for easy carrying of the case.

Top foam layer fits:

• Bridgeplate (BP-02)
• Follow Focus (FF-02)
• Adjustable Gear Ring (FFGR-02)
• C-Arm Support (CA-01)
• Magic Arm (MA-01)

Bottom foam layer fits:

• Universal Grip (UG-02)
• Top Handle (TH-01)
• Shoulder Support Pad (SS-01)