SHAPE DSLR Kirk Neff Rig

SHAPE DSLR Kirk Neff Baseplate 2.0

EAN: 629266002353

The DSLR Kirk Neff Baseplate 2.0 from SHAPE is a 15mm rod baseplate designed for DSLR cameras that utilizes a standard V-lock quick-release system. The quick-release plate provides a 1/4 -20 threaded camera screw and has rubber stoppers at the back to prevent your camera from twisting during operation. The rubber stoppers can be adjusted and removed using the included hex key. For alignment and balance adjustments, the V-lock delta adapter on the bottom of the quick-release plate can be also adjusted forward/backward, and the camera screw can be placed in a front or rear position - using appropriate hex keys.

The baseplate itself features two 15mm rod ports with thumbscrews. It s design places the optical center of camera between the two rods and places the lens at a height suitable for use with a matte box. A pair of 8 aluminum rods come included.

Key Features

• 15mm rod baseplate for DSLR cameras
• V-lock quick-release system
• Adjustable and removable rubber stoppers on quick-release plate prevent camera for twisting
• 1/4 -20 camera screw
• Baseplate respects DSLR optical center
• 8 aluminum 15mm rods included

SHAPE Quick Handle + Rod Block

EAN: 629266000793

The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360° . You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal.

Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

Quick Handle

Provides professional video stabilization with 2 handles

Each handle offers 360° individual rotation

Rod Block

Composed of anodized aluminum

Offers composite camera support for all 15mm rods

Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob

With 2 screw-threaded holes, the Rod Block provides for attachment of components

SHAPE Mini Composite Shoulder Pad

EAN: 629266000830

The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob s screw is a 1/4 -20 screw. If you remove the Screw Knob, you ll have yourself a 1/4 -20 screw-hole to add various 1/4 -20-mount accessories into.

SHAPE Back Pad

EAN: 629266001202

The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad s position can be adjusted to the user s preference - up to 2 vertically and 360° horizontally.

Compatible Support Series

• Composite
• Cameleon
• Sumo
• Spider

SHAPE 15mm Rods (18 , Pair)

EAN: 629266002223

These Shape s 15mm Rods are a pair of 18 long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18 long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps.

Pair of aluminum support rods for 15mm rod clamps.

18 long rods with chamfered ends that guide the rod into an available rod clamp, even if the rod isn t perfectly aligned or is at a slight angle to the rod clamp.