SHAPE Shoulder Mount Kit with Matte Box & Follow Focus for Sony a7R III/a7 III Camera

SHAPE Ergonomic Cage for Sony a7R III/a7 III Camera

EAN: 629266007860

The Ergonomic Cage for Sony a7R III/a7 III from SHAPE is a formfitting cage designed for the a7R III or a7 III 4K camera. It protects the camera by securely locking it to the cage. It provides access to all controls and ports, as well as multiple attachment points for accessories. It is equipped with a cable retainer system for securing the three left side cables, and is compatible with a full-sized HDMI cable protector lock to secure the use of your HDMI cable.

There are multiple mounting options for accessories including two cold shoe mounts on top of the cage. These include thirteen 1/4 -20 anti-rotating hole patterns, five ARRI 3/8 -16 anti-rotating hole patterns. 3/8 -16 anti-rotating hole patterns, and two UNC 3/8 -16 threaded mounting holes. This cage is made from CNC Machined aluminum and is compatible with the Sony XLR-K2M audio unit. It features an ARRI rosette that can be mounted in four different locations.

Simple, hassle-free, ergonomic design for filmmakers, videographers, and photographers

Horizontal 15mm rod clamp on each side allows for the positioning of a 15mm rod

Easy access to the camera s features such as the control buttons, side outputs, memory card, the battery compartment, and the lens release button

The support between the lens and the camera grip is designed to anticipate a clearing for the fingers when the camera is handheld, allowing for an ergonomic grip

Easy to assemble and disassemble, the components don t need to be removed to install the camera

The camera is held in place by a 1/4 -20 captive screw integrated into the base of the cage, and secured by the back and sides so it doesn t move forward when equipped with a heavier lens

You can attach a Delta adapter plate (sold separately) underneath the cage to mount it on a quick release plate to switch from a tripod to a handheld setup

You can operate the camera without having to remove the cable doors, and the strap hooks can remain attached to the camera while inserted in the cage

CNC Machined 6061-T6 aluminum holds the camera securely in place and restricts it from rotating with two anti-rotating tabs at the front

HDMI cable protector lock

SHAPE 15mm LW Clamp for Top Handle Grip

EAN: 629266007662

The clamp is made of CNC aluminum and can be attach to the REVOLT Top Handle. The clamp is designed to support a 15 mm stud, like the REVOLT EVF Mount Bracket. The ratchet knob device let you adjust and strongly fix the position of the stud to top handle.


SHAPE 15mm Rods (18 , Pair)

EAN: 629266002223

These Shape s 15mm Rods are a pair of 18 long rods that fit studio and LWS 15mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18 long and machined from hollow aluminum tubes. The rods feature chamfered ends that make it easier to insert into available 15mm rod clamps.

Pair of aluminum support rods for 15mm rod clamps.

18 long rods with chamfered ends that guide the rod into an available rod clamp, even if the rod isn t perfectly aligned or is at a slight angle to the rod clamp.

SHAPE Quick Handle + Rod Block

EAN: 629266000793

The Shape Quick Handle + Rod Block is a professional video stabilization accessory with 2 camera handles, each providing an individual rotation angle of 360° & . You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal.

Combined with the anodized aluminum Rod Block, the Quick Handle offers composite camera support for all 15mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

Quick Handle

Provides professional video stabilization with 2 handles

Each handle offers 360° & individual rotation

Rod Block

Composed of anodized aluminum

Offers composite camera support for all 15mm rods

Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob

With 2 screw-threaded holes, the Rod Block provides for attachment of components

SHAPE Mini Composite Shoulder Pad

EAN: 629266000830

The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob s screw is a 1/4 -20 screw. If you remove the Screw Knob, you ll have yourself a 1/4 -20 screw-hole to add various 1/4 -20-mount accessories into.

SHAPE Back Pad

EAN: 629266001202

The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad s position can be adjusted to the user s preference a€“ up to 2 vertically and 360° & horizontally.

Compatible Support Series

• Composite
• Cameleon
• Sumo
• Spider

SHAPE Friction & Gear Follow-Focus Clic with Adjustable Marker

EAN: 629266000946

The Shape Friction & Gear Follow-Focus Clic with Adjustable Marker is designed to attach onto standard 15mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic atop the rods, and then slide and close a Shape-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods.

The Clic s focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature -- the focus disk -- moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel, as you see in the photo above, or a gear wheel. Both are present in this package, and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won t get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its .8 pitch gears into the teeth.

The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism, as you see in the photo above, or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from a cube-shaped gearbox that you can t see in the photo above because it sits behind the focus disk. Once the screws are off, the focus disk can just be flipp